Analytical Model for Restraint Strains and Self-stressed in Expansive Concrete Filled Steel Tubes (ECFST) estimation

Viktar V. Tur, Radoslaw Duda, Dina Khmaruk, Viktar Basav
2020 Vestnik of Brest State Technical University. Civil Engineering and Architecture  
In this paper, a modified strains development model (MSDM) for expansive concrete-filled steel tube (ECFST) was formulated and verified on the experimental data, obtained from testing specimens on the expansion stage. The modified strain development model for restraint strains and self-stresses values estimation in concrete with high expansion energy capacity under any type of the symmetrical and unsymmetrical finite stiffness restraint conditions was proposed. Based on proposed MSDM a new
more » ... for expansive concrete-filled steel tubes is developed. The main difference between this model and other previously developed models consists in taking into account in the basic equations an induced force in restrain that is considered as an external load applied to the concrete core of the member. For verification of the proposed model-specific experimental studies were performed. As follows from comparison results restrained expansion strains values calculated following the proposed model shows good compliance with experimental data. The values predicted by the proposed MSDM for concrete-filled steel and obtained experimental data demonstrated good agreement that confirms the validity of the former.
doi:10.36773/1818-1212-2020-119-1-93-98 fatcat:tqpkosenibdsddxbva4jilx46y