In this paper, an Adsorption Heat Storage System (AdHS-R134a)/heating system utilising Vermiculite and Calcium Chloride composite adsorbent material was experimentally investigated. The main aim of the experimental investigations is to carry out preliminary tests on a small scale Adsorption Heat Storage Systems (AdHS-R134a) using a heat pump circuit as the regeneration heat source. The test rig was constructed using Vertical Glass Pipes with a heat pump circuit using a mini compressor for

more »

... orting the refrigeration gas as a heat source for desorption cycle. The system also incorporates condenser coils, evaporator coils, and an expansion valve. The integration with a heat pump circuit is to analyse the performance of an AdHS-R134a using off-peak power in desorption/charging cycle or utilising renewable energy sources to minimise conventional energy generated from fossil fuels. Firstly, desorption phase occurs during night hours, when cheap off-peak electricity is available under the 'Economy 7' tariff that is more suitable for households with night storage heaters or if we use lots of electricity at night. Secondly, in the heat pumping phase/adsorption loop which will occur during the day. The useful heat of adsorption in the adsorbent pipe could be used for underfloor heating (35°C-40°C), or for domestic hot water production (55°C-60°C) during the day. The maximum temperature lift observed from the adsorption process is 68.67°C (inside adsorption pipe) with the corresponding COP of 0.55-1.39.