AbstractThe welding of thermoplastic pipes under a shear joint configuration using friction spin welding is investigated. The shear joint configuration consists of two cylindrical and concentric polypropylene plastic parts joined with each other at their interfacing cylindrical surfaces through frictional heat generation. The effects of welding pressure and rotational velocity on the joint overlap distance and joint strength between the parts of polypropylene plastic are evaluated. The study is

more »

... of a specific application in making plastic pressure vessels and joining of pipes. The joint strength is tested by conducting the hydraulic pressure burst test. The burst test is conducted for welded specimens manufactured using different values of rotational velocity and welding pressure. It is observed that at the constant spin velocities, the welding pressure in the range 64.8 to 65.2 kPa produced better joint strength than the other values of welding pressure in the overall range 64–76 kPa. It is concluded that the suitable welding pressure range to manufacture polypropylene plastic pressure vessels in the shear joint configuration using friction spin welding is 64.5 to 65.2 kPa. Further, it is established that the user can control the joint overlap distance at 64.8 kPa welding pressure by selectively controlling the rotational velocity in the range of 700 to 2500 rpm.