Design an Ozone Generator by Using Dielectric Barrier Discharge

Hamid H. Al-Jobouri
2017 Al-Nahrain Journal of Science  
An Ozone generator was designed according to dielectric barrier discharge (DBD) technique with Oxygen as a feed gas for Ozone generating. The effect of the flow rate on the concentration of the Ozone was studied, the flow rate was varied from 0.6 to 5lit/ min for two values of the gap space between electrodes d= 2 and 4 mm, and two values of the electrode area A= 20 and 36 cm 2 . Also, the effect of the applied voltage on the concentration of the Ozone was studied, the applied voltage was
more » ... d voltage was varied from (1-9 kV) for the same gap space and electrode area values. It is found that the concentration of Ozone produced increases with increasing voltage, and decreases with increasing flow rate.
doi:10.22401/jnus.17.1.12 fatcat:ld4uygxy7vbu3mh24tgfmrikza