Design and Development of Stator Stamping Welding Fixture

Prof. Rajesh S. Kalase
2018 International Journal for Research in Applied Science and Engineering Technology  
Fixture is used for locating, holding and supporting a work piece machining like welding of stator case frames. Fixture reduces material handling time and increase the productivity. It is required to change the fixture for the machining of the different stator case frames of different sizes in this project. The old fixture available is time consuming process and requires more material handling time. It will leads to the problem of misalignment & inaccuracy. And also there is no provision for
more » ... iding the misalignment & inaccuracy in operation. Inaccuracy will increase the rejection of frames. If it is need to rework the rejected frames, then it becomes essential to design the special purpose machine. This new fixture will increases the machining cost of stator case frames. So this fixture useful for machining more than one stator case frames with less work setup time & reduced material handling also. The fixture consists of different spigots which are provided on spigot plate to accommodate different stator case frames. Thus there is no need to change the fixture for every stator case frame of different size. As the single fixture is used for different stator case frames, the manufacturing cost of fixture is reduced. The productivity is increased and required manpower for manufacturing is reduced.
doi:10.22214/ijraset.2018.4657 fatcat:7nzm3cezy5c5lj2wqlw5xynxvy