Conventional (3D) etching in silicon is often based on the 'Bosch' plasma etch with alternating half-cycles of a directional Sietch and a fluorocarbon polymer passivation. Also shallow feature etching is often based on cycled processing. Likewise, ALD is time-multiplexed, with the extra benefit of half-reactions being self-limiting, thus enabling layer-by-layer growth in a cyclic process. To speed up growth rate, spatial ALD has been successfully commercialized for large-scale and high-rate

more »

... sition at atmospheric pressure. We conceived a similar spatially-divided etch concept for (high-rate) Atomic Layer Etching (ALEt). The process is converted from time-divided into spatially-divided by inserting inert gas-bearing 'curtains' that confine the reactive gases to individual injection slots in a gas injector head. By reciprocating substrates back and forth under such head one can realize the alternate etching/passivation-deposition cycles at optimized local pressures, without idle times needed for switching pressure or purging. Another improvement toward an all-spatial approach is the use of ALD-based oxide (Al 2 O 3 , SiO 2 , etc.) as passivation during, or gap-fill after etching. This approach, called spatial ALD-enabled RIE, has industrial potential in cost-effective back-endof-line and front-end-of-line processing, especially in patterning structures requiring minimum interface, line edge and fin sidewall roughness (i.e., atomic-scale fidelity with selective removal of atoms and retention of sharp corners).