Evaluation of Compressibility for Normally Consolidated South-east Coast Clay Using CPT and DMT
CPT와 DMT를 이용한 남동해안 정규압밀 점토의 압축성 추정

Sung-Jin Hong, Young-Ho Chae, Moon-Joo Lee, Woo-Jin Lee
2011 Journal of the Korean Geotechnical Society  
A series of in-situ and laboratory tests were performed for the clayey soils of Busan area in order to develop the methods to evaluate the compressibility using CPT and DMT results. The laboratory tests show that the clayey layers of Busan areas are normally consolidated, and their compression indices are turned out to be 0.5~1.3. From the analysis of test results, correlation factors between the cone resistance and constrained modulus ( m and  n ) are observed to decrease with increasing
more » ... ticity index, and the correlation factor between the dilatometer modulus and constrained modulus (RM) increases with 1/ID. Based on these relationships, the methods evaluating the constrained modulus from CPT and DMT results are suggested. It is shown that the prediction method by CPT underestimates the constrained modulus of improved ground, whereas the prediction method by DMT is suitable for evaluating the constrained modulus of improved and unimproved ground. 요 지 본 연구는 CPT와 DMT를 이용한 부산지역 점토 압축성 추정에 관한 것으로, 이를 위해 부산신항과 녹산점토에 대해 현장시험 및 실내시험을 수행하였다. 압밀시험 결과 부산신항 및 녹산 점토는 정규압밀점토이며, 압축지수는 0.5~1.3로 나타났다. 분석결과에 의하면 콘저항치와 횡방향구속 변형계수의 상관계수인  m 과  n 은 소성지수에 따라 감소하였으며, 딜라토미터 계수와 횡방향구속 변형계수의 상관계수 R M 은 1/I D 에 따라 증가하였다. 본 연구에서는 이러 한 관계를 이용하여 횡방향구속 변형계수를 추정하는 방법을 제안하였다. 제안된 방법으로 횡방향구속 변형계수를 추정한 결과 CPT 추정방법은 개량 후 지반의 횡방향구속 변형계수를 과소평가한 반면, DMT 추정방법은 개량 전・후 지반 모두 횡방향구속 변형계수를 적절히 추정하였다.
doi:10.7843/kgs.2011.27.4.021 fatcat:fqdljoqt6vcpvfxzfwymp3qqoq