Multi-stage forging on torx-pin screw with high torque

Gow-Yi Tzou, Dyi-Cheng Chen, Shih-Hsien Lin, W.-H. Hsieh
2017 MATEC Web of Conferences  
The study assumes constant shear friction to simulate multi-stage forging on torx-pin screw with high torque using FEM commercial software. Because the screw head has a plum needle shape with the effect of high torque, the 3D simulation model is used to explore the effective stress, the effective strain, the velocity field, and the forging force in each stage. The forming pass schedule considers three stages to obtain the product, and uses the Deform-3D software to explore the feasibility of
more » ... ming pass schedule. Finally, the realistic manufacturing of torx-pin screw can be carried out to compare with the simulation results to verify the acceptance of FEM simulation. The maximum dimension error between simulation and experiment is around 2.45%, thus the feasibility of FEM simulation to die design for manufacturing the torx-pin screw can be verified. a Corresponding
doi:10.1051/matecconf/201711901048 fatcat:tmz3hjbcsfeevfjuumdvpsw4iq