The oxidation of formaldehyde on high overvoltage DSA type electrodes

Artur J. Motheo, Ernesto R. Gonzalez, Germano Tremiliosi-Filho, Paulo Olivi, Adalgisa R. de Andrade, Boniface Kokoh, Jean-Michel Léger, El Mustapha Belgsir, Claude Lamy
2000 Journal of the Brazilian Chemical Society  
Neste trabalho a oxidação eletroquímica do formaldeído é estudada sobre eletrodos dimensionalmente estáveis preparados por decomposição térmica de percursores (correspondentes cloretos). Foram utilizados como eletrodos de trabalho: Ti/Ir 0.3 Ti 0.7 O 2 , Ti/Ru 0.3 Ti 0.7 O 2 e Ti/ Ir 0.2 Ru 0.2 Ti 0.6 O 2 . As eletrólises foram realizadas galvanostaticamente em uma célula do tipo filtro prensa em soluções 0,5 mol L -1 H 2 SO 4 com concentração inicial de formaldeído de 100 mmol L -1 . A
more » ... ação de formaldeído decresce rapidamente com o tempo de eletrólise sendo que o eletrodo ternário (Ir + Ru + Ti) é o que apresenta maior atividade catalítica. O ânodo contendo somente Ir, apesar de maior carga superficial é o de menor atividade eletrocatalítica. Para a oxidação de ácido fórmico, formado pela oxidação de formaldeído, a presença de Ir na composição do ânodo não favorece o processo, sendo o ânodo contendo somente Ru o mais efetivo para este processo. The electrochemical oxidation of formaldehyde is studied on dimensionally stable anodes prepared by thermal decomposition of precursors (the corresponding chlorides). The working electrodes used were: Ti/Ir 0.3 Ti 0.7 O 2 , Ti/Ru 0.3 Ti 0.7 O 2 and Ti/Ir 0.2 Ru 0.2 Ti 0.6 O 2 . The electrolyses were performed galvanostatically in a filter press cell with 0.5 mol L -1 H 2 SO 4 solutions with initial formaldehyde concentration equal to 100 mmol L -1 . The concentration of formaldehyde decreases fast with the electrolysis time, with the ternary anode (Ir + Ru + Ti) presenting the best performance for this step. The anode containing only Ir, despite presenting the higher superficial charge, is the one with the lowest electrocatalytic activity. For the formic acid oxidation step, the presence of iridium in the anode composition does not promote the process, the anode containing only ruthenium being the most effective for this step.
doi:10.1590/s0103-50532000000100004 fatcat:ok3yilvf4bgzpephoewddeq7ca