Internet Archive Scholar

Microcontroller and SD Card Based Standalone Data Logging System using SPI and I2C Protocols for Industrial Application

M Satheesh, B Senthilkumar, T Veeramanikandasamy, O Saravanakumar
2007 International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (An ISO   unpublished

Preserved Fulltext

fulltext thumbnail
Web Archive Capture PDF (407.8 kB)
https://web.archive.org/web/20180510135904/http://www.rroij.com/open-access/microcontroller-and-sd-card-based-standalone-data-logging-system-using-spiand-i2c-protocols-for-industrial-application-.pdf

A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL. The file type is application/pdf.

The low cost micro SD card based Data Logging System (DLS) for the measurement of parameters such as temperature, load current, load voltage and power have been designed and developed. These parameters are the time varying signals that are sensed by respective sensors. The sensor values are read by on-chip ADC and it is used for further process. The micro secured digital (SD) card is interfaced with PIC18F45K22 microcontroller in Serial Peripheral Interface (SPI) mode of Master Synchronous
more » ... er Synchronous Serial Port (MSSP) for DLS design. The RTC is also interfaced to the microcontroller using I2C protocol to provide time stamping. The designed DLS has been tested with the application program developed in MPLAB X IDE which can write data into SD card at the rate of 5 samples / second.
fatcat:qz5bvyutkncxblihbnnpaaysoe
Citation

M Satheesh, B Senthilkumar, T Veeramanikandasamy, O Saravanakumar. "Microcontroller and SD Card Based Standalone Data Logging System using SPI and I2C Protocols for Industrial Application." International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (An ISO (2007)