The formation of a pile in the existing foundation and soil creates a new foundation construction which has a structure of foundation-pile-soil. This construction must be able to transfer loads from the foundation to the pile and from the pile to the soil. The pile structure has to transfer an imposed load. From the point of view of continuum mechanics determination of the capacity of such a system is preceded by the analysis of contact problem of three contact surfaces. Each of these surfaces

more »

... s determined by different pairs of materials. The pair which creates a pile anchorage is a material from which the foundation is built (structure of stone and grout, brick and grout, concrete or reinforced concrete and grout. The pile structure is formed by grout and steel rebar. The pile formed in soil is created by a pair of grout and soil. What is important is that on contact surfaces the materials adhering to one another are subjected to different deformation types that are controlled by mechanical properties and geometry of these surfaces. In the paper, additional conditions that should be fulfilled for the foundation-pile-soil system to make load transfer from foundation to soil possible and safe are presented. The results of research done by the author on foundation-pile contact surface are discussed. The tests were targeted at verifying the bearing capacity of anchorage and deformation of piles made of grout and other materials from which foundations are built. The specimens were tested in tension and compression. The experiments were conducted on the amount specimens which is regarded as small sample to enable the statistical analysis of the results.