PODER CALORÍFICO DA MADEIRA DE Eucalyptus grandis E DA Hevea brasiliensis WOOD CALORIFIC POWER FROM Eucalyptus grandis AND Hevea brasiliensis SPECIES

S. D. Müzel, K. A. De Oliveira, F. A. S. Hansted, G. A. Prates, D. Goveia
2014 Revista Brasileira de Engenharia de Biossistemas  
RESUMO A biomassa é todo o material orgânico que, quando queimado, libera alguma forma de energia. Para utilização da biomassa é necessário conhecer o seu poder calorífico que está diretamente relacionada com o teor de umidade no combustível. O objetivo deste estudo é determinar o poder calorifico superior das espécies de Eucalyptus grandis e Hevea brasiliensis, visando conhecer seu potencial energético. Foi determinado o teor de umidade pelo método gravimétrico e poder calorifico superior
more » ... és de uma bomba calorimétrica Ika. Os resultados do teor de umidade foram satisfatórios em comparação com os recomendados pela NBR 14929 (2003), DIN 51731 e ÖNORM M7135. O poder calorífico superior foi considerado adequado comparando com os encontrados na literatura, por conseguinte, estes materiais mostraram ter um bom potencial energético, podendo ser utilizados para queima, como biomassa ou na produção de pellets. Palavras-chave: Biomassa, Potencial energético, Poder calorifico Superior. WOOD CALORIFIC POWER FROM Eucalyptus grandis AND Hevea brasiliensis SPECIES ABSTRACT Biomass is all organic material, which when burned, releases some form of energy. In order to characterize biomass burning is becomes necessary to know its calorific value that is directly related to the moisture content on the fuel. The objective of this study is to determine the high heating value from particles of the species Eucalyptus grandis and Hevea brasiliensis, aiming to know its energy potential. To accomplish this it was determined the moisture content by gravimetric method, and the high heating value was determined by an isothermal calorimeter Ika bomb. The results for moisture content were satisfactory compared with those recommended by the NBR 14929 (2003), DIN 51731 and ÖNORM M7135, and as the high heating calorific value was considered appropriate and for what it is worth greater than the usual values found in literature, therefore this material has proved to have a good power potential and can be used for burning, and also on power generation.
doi:10.18011/bioeng2014v8n2p166-172 fatcat:qwzbbty5zvg5xb35x56kntanc4