Experimental study of curved guide tubes for pellet injection

S.K. Combs, L.R. Baylor, C.R. Foust, W.J. Gouge, T.C. Jernigan, S.L. Milora
17th IEEE/NPSS Symposium Fusion Engineering (Cat. No.97CH36131)  
The use of curved guide tubes for transporting frozen hydrogen pellets offers great flexibility for pellet injection into plasma devices. While this technique has been previously employed, an increased interest in its applicability has been generated with the recent ASDEX Upgrade experimental data for magnetic high-field side (HFS) pellet injection. In these innovative experiments, the pellet penetration appeared to be significantly deeper than for the standard magnetic low-field side injection
more » ... scheme, along with corresponding greater fueling efficiencies. Thus, some of the major experimental fusion devices are planning experiments with HFS pellet injection. Because of the complex geometries of experimental fusion devices, installations with multiple curved guide tube sections will be required for HFS pellet injection. To more thoroughly understand and document the capability of curved guide tubes, an experimental study is under way at the Oak Ridge National Laboratory (ORNL). In particular, configurations and pellet parameters applicable for the DIII-D tokamak and the International Thermonuclear Experimental Reactor (ITER) were simulated in laboratory experiments. Initial test results with nominal 2.7-and 10-mm-diam deuterium pellets are presented and discussed.
doi:10.1109/fusion.1997.687817 fatcat:ifrxzfo5tvfp3jmksayjn2y6za