Reliability Analysis of Plank Decks

Andrzej S. Nowak, Christopher D. Eamon
2008 Journal of Bridge Engineering  
The objective of this study is to summarize the load and resistance criteria for highway bridge plank decks, and to estimate the reliability of plank decks designed by AASHTO Code. Both transverse and longitudinal planks for a variety of typical stringer spacings and plank sizes are considered. Truck traffic load data is based on the model used to calibrate the 1994 AASHTO LRFD Code. However, for plank decks, wheel load rather than whole vehicle weight is most important, and these statistics
more » ... these statistics are developed for this study. For wood planks, dead load and dynamic load are not significant. The limit state considered is flexural strength, and resistance statistics are presented for wood planks in terms of modulus of rupture. Special flat-wise use data are presented to account for section aspect ratio as well as edge of load application. The reliability analysis is carried out using the procedure developed for calibration of AASHTO LRFD. Reliability indices for both AASHTO Standard and AASHTO LRFD Code are presented for plank decks. The results indicate that there are considerable differences in plank reliability indices. Causes of inconsistencies in safety are identified.
doi:10.1061/(asce)1084-0702(2008)13:5(540) fatcat:kjhjvgj5k5a3bkedzmzggp65qy