A series of Mn0.15Fe0.05/fly-ash catalysts have been synthesized by the co-precipitation method using coal fly ash (FA) as the catalyst carrier. The catalyst showed high catalytic activity for low-temperature selective catalytic reduction (LTSCR) of NO with NH3. The catalytic reaction experiments were carried out using a lab-scale fixed-bed reactor. De-NOx experimental results showed the use of optimum weight ratio of Mn/FA and Fe/FA, resulted in high NH3-SCR (selective catalytic reduction)

more »

... vity with a broad operating temperature range (130–300 °C) under 50000 h−1. Various characterization methods were used to understand the role of the physicochemical structure of the synthesized catalysts on their De-NOx capability. The scanning electron microscopy, physical adsorption-desorption, and X-ray photoelectron spectroscopy showed the interaction among the MnOx, FeOx, and the substrate increased the surface area, the amount of high valence metal state (Mn4+, Mn3+, and Fe3+), and the surface adsorbed oxygen. Hence, redox cycles (Fe3+ + Mn2+ ↔ Mn3+ + Fe2+; Fe2+ + Mn4+ ↔ Mn3+ + Fe3+) were co-promoted over the catalyst. The balance between the adsorption ability of the reactants and the redox ability can promote the excellent NOx conversion ability of the catalyst at low temperatures. Furthermore, NH3/NO temperature-programmed desorption, NH3/NO- thermo gravimetric-mass spectrometry (NH3/NO-TG-MS), and in-situ DRIFTs (Diffuse Reflectance Infrared Fourier Transform Spectroscopy) results showed the Mn0.15Fe0.05/FA has relatively high adsorption capacity and activation capability of reactants (NO, O2, and NH3) at low temperatures. These results also showed that the Langmuir–Hinshelwood (L–H) reaction mechanism is the main reaction mechanism through which NH3-SCR reactions took place. This work is important for synthesizing an efficient and environmentally-friendly catalyst and demonstrates a promising waste-utilization strategy.