Sintered steel is used as a material for valve seat insert in automotive engines. During operation, a dynamic contact occurs between the valve and its seat. To investigate the wear behavior of sintered steel for this application, we have developed an impact-sliding tester using a ball on flat configuration. Impact-sliding experiments have been conducted at different impact angles (30°, 45°, 60°) with and without lubrication to investigate the surface damage of the sintered steel under this

more »

... ct loading and to understand the effect of lubrication. Our results have shown an important variation of the wear rate in relation to impact-sliding angle. In dry condition, a low wear regime is observed for low angles; whereas maximum wear is observed at 60° angle for lubricated contacts. The wear scar in the dry contact is deeper than in the lubricated one. The damaged surface of sintered steel is examined by a Scanning Electron Microscopy (SEM). In dry conditions, the contact area wears out quickly due to an adhesive-abrasive process. Under lubricated conditions, a fatigue crack opening is associated to a lower wear rate. The lubricated impact-sliding condition modifies the main surface damage phenomena.