3D printing-as-a-service for collaborative engineering [article]

Felix W. Baumann, Universität Stuttgart, Universität Stuttgart
2017
3D printing or Additive Manufacturing (AM) are utilised as umbrella terms to denote a variety of technologies to manufacture or create a physical object based on a digital model. Commonly, these technologies create the objects by adding, fusing or melting a raw material in a layer-wise fashion. Apart from the 3D printer itself, no specialised tools are required to create almost any shape or form imaginable and designable. The possibilities of these technologies of these technologies are
more » ... l and cover the ability to manufacture every object, rapidly, locally and cost-efficiently without wasted resources and material. Objects can be created to specific forms to perform as perfectly fitting functions without consideration of the assembly process. To further the advance the availability and applicability of 3D printing, this thesis identifies the problems that currently exist and attempts to solve them. During the 3D printing process, data (i. e., files) must be converted from their original representation, e. g., CAD file, to the machine instructions for a specific 3D printer. During this process, information is lost, and other information is added. Traceability is lacking in 3D printing. The actual 3D printing can require a long period of time to complete, during which errors can occur. In 3D printing, these errors are often non-recoverable or reversible, which results in wasted material and time. In addition to the lack of closed-loop control systems for 3D printers, careful planning and preparation are required to avoid these costly misprints. 3D printers are usually located remotely from users, due to health and safety considerations, special placement requirements or out of comfort. Remotely placed equipment is impractical to monitor in person; however, such monitoring is essential. Especially considering the proneness of 3D printing to errors and the implications of this as described previously. Utilisation of 3D printers is an issue, especially with expensive 3D printers. As there are a number of differ [...]
doi:10.18419/opus-9339 fatcat:rhvxl44ma5dvfcexvbmdmwgxvi