Analysis and Design of G+6 Building in Different Seismic Zones by using Software

Shubham Borkar
2019 International Journal for Research in Applied Science and Engineering Technology  
The principle objective of this project is to analyze and design of G + 6 building in different seismic zones and in different soil types by using ETABS. In this project, all the four zones and three types of soils have been taken under consideration. ETABS (Extended Three Dimensional Analysis of Building System) is a software that is incorporated with all the major analysis engines that are static, dynamic, Linear and non-linear and especially this Software is used to analyze and design the
more » ... e and design the buildings. The present work is to study the behaviour of a G+6 building subjected to earthquake load by adopting Response spectrum analysis. We analyzed G + 6 storey building for all possible load combinations [Dead, Live &Seismic loads]. Seismic loads were taken as per IS 1893: 2002. Our final work was the analysis of G + 6 building under various load combination. We considered a commercial building as specified in the plan. The height from the ground floor to sixth floor is 3.0 m. The structure was subjected to self-weight, dead load, live load and seismic loads under the load case details of ETABS. Seismic load calculations were done with the following IS 1893-2000 (part-1). The materials were specified and cross-sections of the beam and column members were assigned. The supports at the base of the structure were also specified as fixed.
doi:10.22214/ijraset.2019.5171 fatcat:i4hheifdlrbaljz7cttsbuzovi