Articular human joint modelling

Ibrahim I. Esat, Neviman Ozada
2009 Robotica (Cambridge. Print)  
The work reported in this paper encapsulates the theories and algorithms developed to drive the core analysis modules of the software which has been developed to model a musculoskeletal structure of anatomic joints. Due to local bone surface and contact geometry based joint kinematics, newly developed algorithms make the proposed modeller different from currently available modellers. There are many modellers that are capable of modelling gross human body motion. Nevertheless, none of the
more » ... le modellers offer complete elements of joint modelling. It appears that joint modelling is an extension of their core analysis capability, which, in every case, appears to be musculoskeletal motion dynamics. It is felt that an analysis framework that is focused on human joints would have significant benefit and potential to be used in many orthopaedic applications. The local mobility of joints has a significant influence in human motion analysis, in understanding of joint loading, tissue behaviour and contact forces. However, in order to develop a bone surface based joint modeller, there are a number of major problems, from tissue idealizations to surface geometry discretization and non-linear motion analysis. This paper presents the following: (a) The physical deformation of biological tissues as linear or non-linear viscoelastic deformation, based on spring-dashpot elements. (b) The linear dynamic multibody modelling, where the linear formulation is established for small motions and is particularly useful for calculating the equilibrium position of the joint. This model can also be used for finding small motion behaviour or loading under static conditions. It also has the potential of quantifying the joint laxity. (c) The nonlinear dynamic multibody modelling, where a non-matrix and algorithmic formulation is presented. The approach allows handling complex material and geometrical nonlinearity easily. (d) Shortest path algorithms for calculating soft tissue line of action geometries. The developed algorithms are based on calculating minimum 'surface mass' and 'surface covariance'. An improved version of the 'surface covariance' algorithm is described as 'residual covariance'. The resulting path is used to establish the direction of forces and moments acting on joints. This information is needed for linear or non-linear treatment of the joint motion. (e) The final contribution of the paper is the treatment of the collision. In the virtual world, the difficulty in analysing bodies in motion arises due to body interpenetrations. The collision algorithm proposed in the paper involves finding the shortest projected ray from one body to the other. The projection of the body is determined by the resultant forces acting on it due to soft tissue connections under tension. This enables the calculation of collision condition of non-convex objects accurately. After the initial collision detection, the analysis involves attaching special springs (stiffness only normal to the surfaces) at the 'potentially colliding points' and motion of bodies is recalculated. The collision algorithm incorporates the rotation as well as translation. The algorithm continues until the joint equilibrium is achieved. Finally, the results obtained based on the software are compared with experimental results obtained using cadaveric joints.
doi:10.1017/s0263574709990592 fatcat:vkdkqjpntzaetcpdphvcfxm3cu