Estudio de las propiedades mecánicas y tribológicas de recubrimientos multicapa de espaciado sub-micrométrico
Study of mechanical and tribological properties of multilayered coatings with sub-micron spacing

R. J. Rodríguez, A. Medrano, M. Rico, B. Lerga, R. Martínez, R. Bueno, J. A. García
2004 Boletín de la Sociedad Española de Cerámica y Vidrio  
El presente trabajo recoge un estudio comparativo de las propiedades mecánicas y tribológicas (microdureza, fluencia, módulo elástico, coeficientes de fricción y desgaste), de multicapas TiN/AlTiN y TiN/CrN depositadas mediante técnicas industriales de PVD. Las capas, de espesores comprendidos entre 25nm y 100nm, se depositaron secuencialmente sobre substratos de WC, hasta obtener un espesor total de unas 2 micras. El estudio mecánico y tribológico comparativo incluyó ensayos de microdureza a
more » ... rgas entre 10 mN y 750 mN, módulo elástico, comportamiento frente a fluencia y coeficientes de fricción y desgaste. Palabras clave: Study of mechanical and tribological properties of multilayered coatings with sub-micron spacing This work gathers a comparative study of the mechanical and tribological behaviour (microhardness under load, Young modulus, elasticplastic properties, friction and wear coefficients) of TiN/CrN and TiN/AlTiN multilayers deposited by conventional industrial PVD techniques. PVD multilayers with about between 50 nm individual layer thickness were deposited on flat samples of Co-cemented WC achieving a total thickness of about 2 microns. Mechanical and Tribological tests include microhardness under load at final loads between 10 mN aand 750 mN, Young modulus calculations and friction and wear tests.
doi:10.3989/cyv.2004.v43.i2.578 fatcat:zsrf7b22ajftbnyh54rmzytnqu