Heat flux from stagnation-point hydrogen-methane-air flames: experiment and modelling

M. S. Elmnefi, S. Staude, U. Bergmann, B. Atakan
2014 Advanced Computational Methods and Experiments in Heat Transfer XIII   unpublished
Hydrogen-methane-air flames were studied in stagnation-point geometry. Light induced phosphorescence from thermographic phosphors was used to study the wall temperatures and heat fluxes from nearly one-dimensional flat premixed flames. The studied flames were stoichiometric methane-air flames with 10%, 25%, 50% and 75% hydrogen as well as a pure hydrogen flame at ambient pressure. The flames were burning in a stagnation-point arrangement against a water cooled plate. The central part of this
more » ... te was an alumina ceramic plate coated from both sides with chromium doped alumina (ruby) and excited with a Nd:YAG laser or a green light emitting diode (LED) array to measure the wall temperature from both sides and thus the heat flux rate from the flame. The cold gas velocity was varied from 0.1 m/s to 1.2 m/s. The measured heat flux rates indicate the change of the flame stabilization mechanism from a burner stabilized to a stagnation plate stabilized flame. Flame temperatures were also measured using OH-LIF. The results were compared to the modeling results of a one dimensional stagnation-point flow, with a detailed reaction mechanism. This geometry may be well suited for further studies of the elementary flame wall interaction. The flame temperatures modeled were generally around 200 K lower than those measured.
doi:10.2495/ht140351 fatcat:sex7j2rv2ncdxejbb2r7mqlfde