Improved Biaxial Flexure Test (BFT) for Concrete with the Optimum Specimen Geometry
최적 시험체 형상을 고려한 개선된 콘크리트 등방휨인장강도 시험법

Gooang-Seup Zi, Ji-Hwan Kim, Hong-Seob Oh
2009 Journal of the Korea Concrete Institute  
For designing concrete structures, engineers are provided data from unidirectional flexure test in most cases. But real structural components such as pavements and deck panel are subjected to multiaxial stress throughout their body. Therefore, biaxial flexure test for concrete may be considered as a gage of the performance of concrete in service. In this paper, we propose the optimum biaixial flexture test (BFT) to measure the biaxial flexural strength of concrete. This method are an improved
more » ... rsion of the ring-on-ring test which have been used extensively in the fields of ceramics and biomaterials. The optimum geometry of the test specimen was determined by using a three-dimensional finite element analysis. A series of test data obtained from the proposed test method is provided to show that the proposed optimum biaxial flexure test method can be used to identify the biaxial tensile strength of concrete. Keywords : biaxial flexural test (BFT), tensile strength, crack, fracture Ring on ring test는 하중 가력점과 지지점이 모두 환 으로 구성되어 있는 실험방법이고, ball on ring test는 가 력점과 지지점이 각각 구와 환으로 구성되는 경우이다. 또한 ball and three ball test는 지지점이 3개의 구로 적 용된 것이며, ring on on ring의 경우는 가력점이 원형의 집중하중으로 재하되는 실험방법이다. 11) 이축 또는 등방휨강도 실험방법이 기존의 일축실험방 법보다 구조물의 재료적 물성을 보다 적절히 평가할 수 있는 장점은 이축휨실험이 일축실험에서 발생할 수 있는 단부조건에 의한 영향과 가력점과 지지점 사이에 발생할 수 있는 응력의 급격한 구배를 최소화할 수 있다는 것 이다. 9,11) 따라서 이축휨강도를 적용하면 실제 모든 실제 구조물 또는 재료에서 발생하는 이축응력 상태를 설계에 충분히 반영할 수 있는 것이다. 5,9,12,13)
doi:10.4334/jkci.2009.21.4.523 fatcat:25o2h4lz7rcz7kuen2pvz5jhde