Additive manufacturing (AM), also referred to as 3D printing, has gained popularity due to the recent developments and market trends especially in the last decades. The main advantages of AM are its capability of producing parts with high geometrical complexity at almost no added cost, short lead times, weight reduction, less efforts for assembly and suitability for customization as well as for low volume production or even single parts. Moreover, some applications may need materials with

more »

... l combinations of properties, which cannot be provided only by metals, polymers or ceramics. For such applications, composite materials combining two or more materials allow having the preferred properties combined in a single material. Thus, AM, which can be defined as a process of adding materials to produce objects directly from its CAD model in successive layers in contrast to subtractive processes, is gaining significance for critical applications using composite materials. This paper thus presents a detailed review of AM of polymers reinforced with chopped / continuous fibers and the influence of this reinforcement on the mechanical performance of composite parts, mainly focusing on the Fused Deposition Modelling (FDM) process. On one hand, the reviewed studies on the FDM of composites mainly point out that that the mechanical performance is significantly enhanced in contrast to polymers with no reinforcement. Yet, it is also evident that the mechanical performance of FDM composites is highly dependent on the build direction and porosity. Thus, there is still a wide range of gaps to be studied for replacing metallic components by AM composites.