Through-tunnel estimates of vehicle fleet emission factors
h i g h l i g h t s Drive-through approach is developed to determine tunnel emission factor. Sen Slope method is less biased than entrance-exit approach. Diesel fleet emission factor is obtained with bivariate regression. a b s t r a c t On-road measurements of traffic-related gas and particle pollutant concentrations in three tunnels in Hong Kong and high resolution pollutant concentration profiles obtained while driving through the tunnels were used to derive the individual pollutant
... pollutant gradients using parametric and non-parametric (Sen eThiel) slopes and compared with the commonly used entrance-exit two points calculation. The fuel based emission factors of measured pollutants for individual tunnels at different times of day were derived from gradients using a new method based on fuel carbon balance principle. Combined with the tunnel traffic volume and composition, the average tunnel emission factors were analyzed by linear regression to derive the diesel fleet emission factors. Average nitrogen oxides (NOx) and black carbon (BC) emission factor for diesel fleets are 29.3 ± 11.0 gNO 2 kg À1 and 1.28 ± 0.76 g kg À1 of fuel, respectively. The results from the study were compared with the emission data from vehicle chasing approaches and the literature, showing reasonable agreement. Practical limitations and future direction for improvement of our method were also discussed. The method presented in this study provides a convenient drivethrough approach for fast determination of tunnel and individual vehicle fleet emission factors. It can be used as an effective and fast approach to validate the emission inventory and to evaluate the effectiveness of policy intervention on the traffic emissions.