As well known that the Iron and steel Industry has been priority policy by Indonesian goverment in order to meet requirement of iron and steel in community base. There were made to develope processes for producing iron for steelmaking that could serve as alternatives and/or supplementst to the conventional blast furnace in order to produce both of them save energy, low cost and environmental friendly. Fundamental study on the effect of the iron reduction on binder type in iron ore briquette was

more »

... studied by using an electric furnace. In the experiments three types of samples were used. The iron ore were mixture by using low grade coal and three kind of binder for making iron ore briquette. The CO 2 and N 2 gas based were injected into the reductor as the reducing gas media. The reduction degree properties were expressed in terms of iron ore reduction index (IRI). The iron ore reduction index was determined by mass change of the sample after reduced with CO 2 as gas media. The reduction degree iron in sample was characterized by using X-ray diffraction (XRD) analysis. The experimental results show that low grade coal content and binder type are played an important role on briquette mass reduction. 160 The mass reduction of iron ore briquette composed of 10 % low grade coal is faster compared to that composed without using low grade coal. The briquette by using heavy oil as a binder that higher mass reduction is obtained. The component in sample was dominated by Fe 2 O 3 , Fe 3 O 4 and carbon It was shown that iron ore briquette by using asphalt as binder reduced of Fe 2 O 3 into Fe 3 O 4 easily than that using heavy oil and benthonite.