Rethinking DRAM design and organization for energy-constrained multi-cores

Aniruddha N. Udipi, Naveen Muralimanohar, Niladrish Chatterjee, Rajeev Balasubramonian, Al Davis, Norman P. Jouppi
2010 Proceedings of the 37th annual international symposium on Computer architecture - ISCA '10  
DRAM vendors have traditionally optimized the cost-perbit metric, often making design decisions that incur energy penalties. A prime example is the overfetch feature in DRAM, where a single request activates thousands of bitlines in many DRAM chips, only to return a single cache line to the CPU. The focus on cost-per-bit is questionable in modern-day servers where operating costs can easily exceed the purchase cost. Modern technology trends are also placing very different demands on the memory
more » ... ystem: (i) queuing delays are a significant component of memory access time, (ii) there is a high energy premium for the level of reliability expected for business-critical computing, and (iii) the memory access stream emerging from multi-core systems exhibits limited locality. All of these trends necessitate an overhaul of DRAM architecture, even if it means a slight compromise in the cost-per-bit metric. This paper examines three primary innovations. The first is a modification to DRAM chip microarchitecture that retains the traditional DDRx SDRAM interface. Selective Bitline Activation (SBA) waits for both RAS (row address) and CAS (column address) signals to arrive before activating exactly those bitlines that provide the requested cache line. SBA reduces energy consumption while incurring slight area and performance penalties. The second innovation, Single Subarray Access (SSA), fundamentally re-organizes the layout of DRAM arrays and the mapping of data to these arrays so that an entire cache line is fetched from a single subarray. It requires a different interface to the memory controller, reduces dynamic and background energy (by about 6X and 5X), incurs a slight area penalty (4%), and can even lead to performance improvements (54% on average) by reducing queuing delays. The third innovation further penalizes the cost-per-bit metric by adding a checksum feature to each cache line. This checksum error-detection feature can then Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. be used to build stronger RAID-like fault tolerance, including chipkill-level reliability. Such a technique is especially crucial for the SSA architecture where the entire cache line is localized to a single chip. This DRAM chip microarchitectural change leads to a dramatic reduction in the energy and storage overheads for reliability. The proposed architectures will also apply to other emerging memory technologies (such as resistive memories) and will be less disruptive to standards, interfaces, and the design flow if they can be incorporated into first-generation designs.
doi:10.1145/1815961.1815983 dblp:conf/isca/UdipiMCBDJ10 fatcat:tpmfvqphcnhtposip6fzcwzdwm