Multi-Objective Optimization of Two-Stage Helical Gear Train Using NSGA-II

R. C. Sanghvi, A. S. Vashi, H. P. Patolia, R. G. Jivani
2014 Journal of Optimization  
Gears not only transmit the motion and power satisfactorily but also can do so with uniform motion. The design of gears requires an iterative approach to optimize the design parameters that take care of kinematics aspects as well as strength aspects. Moreover, the choice of materials available for gears is limited. Owing to the complex combinations of the above facts, manual design of gears is complicated and time consuming. In this paper, the volume and load carrying capacity are optimized.
more » ... y are optimized. Three different methodologies (i) MATLAB optimization toolbox, (ii) genetic algorithm (GA), and (iii) multiobjective optimization (NSGA-II) technique are used to solve the problem. In the first two methods, volume is minimized in the first step and then the load carrying capacities of both shafts are calculated. In the third method, the problem is treated as a multiobjective problem. For the optimization purpose, face width, module, and number of teeth are taken as design variables. Constraints are imposed on bending strength, surface fatigue strength, and interference. It is apparent from the comparison of results that the result obtained by NSGA-II is more superior than the results obtained by other methods in terms of both objectives.
doi:10.1155/2014/670297 fatcat:b224wnsrkfexnnjamhzlqsvjrm