Modelling of automotive fuel droplet heating and evaporation: mathematical tools and approximations

Sergei S. Sazhin, Mansour Al Qubeissi
2016 Journal of Physics, Conference Series  
New mathematical tools and approximations developed for the analysis of automotive fuel droplet heating and evaporation are summarised. The approach to modelling biodiesel fuel droplets is based on the application of the Discrete Component Model (DCM), while the approach to modelling Diesel fuel droplets is based on the application of the recently developed multi-dimensional quasi-discrete model. In both cases, the models are applied in combination with the Effective Thermal
more » ... Conductivity/Effective Diffusivity model and the implementation in the numerical code of the analytical solutions to heat transfer and species diffusion equations inside droplets. It is shown that the approximation of biodiesel fuel by a single component leads to under-prediction of droplet evaporation time by up to 13% which can be acceptable as a crude approximation in some applications. The composition of Diesel fuel was simplified and reduced to only 98 components. The approximation of 98 components of Diesel fuel with 15 quasi-components/components leads to under-prediction of droplet evaporation time by about 3% which is acceptable in most engineering applications. At the same time, the approximation of Diesel fuel by a single component and 20 alkane components leads to a decrease in the evaporation time by about 19%, compared with the case of approximation of Diesel fuel with 98 components. The approximation of Diesel fuel with a single alkane quasi-component (C14.763H31.526) leads to under-prediction of the evaporation time by about 35% which is not acceptable even for qualitative analysis of the process. In the case when n-dodecane is chosen as the single alkane component, the above-mentioned under-prediction increases to about 44%.
doi:10.1088/1742-6596/727/1/012015 fatcat:gpey4frjwbduljy5fa2yrfsgju