The evaluation of the surface quality after laser cutting

Tomáš Zlámal, Šárka Malotová, Jana Petrů, Zbigniew Brytan, Václav Musil, A. Rudawska, V. Tlach, D. Stančeková, M. Vaško, J. Szabelski, J. Mrázik, A. Sapietová (+1 others)
2018 MATEC Web of Conferences  
The contribution deals with the evaluation of the surface quality after laser cutting and determination of the influence individual input laser parameters at the whole process. There were selected samples for experiment made from S235JR material with the thickness 10 mm and 15 mm. There was set up values of process parameters, such as laser power, focal spot position, cutting speed and shield gas pressure. The final surface quality was measured and evaluated on the basis of the selected surface
more » ... he selected surface roughness parameters and material ratio. The surface quality was evaluated from point of view of defects emerging after thermal splitting according to standard ČSN EN ISO 17 658.
doi:10.1051/matecconf/201824402009 fatcat:56365fl5ovhvpeg2u73oxylwlq