Determination of Sapphire Off‐Cut and Its Influence on the Morphology and Local Defect Distribution in Epitaxially Laterally Overgrown AlN for Optically Pumped UVC Lasers [article]

Johannes Enslin, Arne Knauer, Anna Mogilatenko, Frank Mehnke, Martin Martens, Christian Kuhn, Tim Wernicke, Markus Weyers, Michael Kneissl, Technische Universität Berlin, Technische Universität Berlin
2020
Herein, a systematic study of the morphology and local defect distribution in epitaxially laterally overgrown (ELO) AlN on c‐plane sapphire substrates with different off‐cut angles ranging from 0.08° to 0.23° is presented. Precise measurements of the off‐cut angle α, using a combination of optical alignment and X‐ray diffraction with an accuracy of ±5° for the off‐cut direction and ±0.015° for the off‐cut angle, are carried out. For ELO AlN growth, a transition from step flow growth at α 0.14°
more » ... growth at α 0.14° is observed. Furthermore, the terraces of the step‐bunched surface exhibit curved steps. An analysis of the local defect distribution by scanning transmission electron microscopy and a comparison with atomic force microscopy reveal a bunching of defects in line with the ELO pattern and a roughening of step edges in highly defective regions. In addition, a reduction in the threshold excitation power density for optically pumped ultraviolet‐C (UVC) lasers with smooth surface morphologies is observed.
doi:10.14279/depositonce-9648 fatcat:35smlh2t7fbp5if5b4w4paggn4