Triangulation Reconstruction for 3D Surface Based on Information Model

Na Li, Jiquan Yang, Aiqing Guo, Yijian Liu, Hai Liu
2016 Cybernetics and Information Technologies  
The aim of this paper is to address the surface reconstruction from point cloud in reverser engineering. The data was acquired through a 3D scan device and was processed as point cloud data. The points in cloud were connected to build 3D surface. The points cloud was processed in four steps to get 3D information surface. First, the subtraction scheme was used to get cover boxes ended with the set of convex was found under the convergence rule. Secondly, the points in the box were projected to
more » ... were projected to the directions which were close to the normal direction method. Thirdly the overlap was avoided by using convergence rule and inner subdivision rule. Finally the information model was used to reconstruction. The method was used in landslide monitoring of Three Gorges area for 3D surface reconstruction and monitoring. The reconstruction method obtains high precision and low complexity. It is effective for large scale monitoring.
doi:10.1515/cait-2016-0049 fatcat:nhgznc7mibb2jcztgllo6nlnnm