Monitoring of selected process variables during the CFG grinding
Monitorowanie wybranych wielkości procesowych w szlifowaniu CFG

Robert Babiarz
2015 Mechanik  
obróbkę często jako szlifowania stosuje się Proces zgrubną dla materiałów trudno skrawalnych (proces CFG). Jednocześnie jego efekt jest zależny od trudnych do zmierzenia w trybie on-line parametrów. Z uwagi na znaczny koszt elementów obrabianych istotnym zagadnieniem jest problem monitorowania tego procesu. celu na mają Zaprezentowane badania tego celu wykorzystania do możliwości określenie wielkości pomiarowych sygnałów wybranych procesowych. W przeprowadzonych badaniach wykorzystano układy
more » ... iarowe emisji akustycznej, prądu wrzeciona ściernicy, drgań oraz składowych stycznej i normalnej siły szlifowania. Następnie zostały one ocenione pod kątem możliwości wykorzystania w układzie monitorowania procesu. Efekt końcowy procesu określano poprzez pomiary parametrów chropowatości oraz brak uszkodzeń termicznych powierzchni. SŁOWA KLUCZOWE: szlifowanie, monitorowanie, CFG The grinding process is often used as a roughing operation for materials difficult to machine (the process CFG). Simultaneously the end result is dependent on a large number of different, difficult to measure on-line parameters. Because of the significant cost of workpieces significant issue becomes the problem of monitoring this process. The presented research are to determine capabilities of using to that selected process variables of measuring signals. In this the acoustic emission, current of grinding spindle, vibrations and grinding force signal were used. They were then evaluated for capabilities to use in the system for monitoring the CFG process. The end results of the process were determined by measuring the roughness parameters and the lack of thermal damage on the surface.
doi:10.17814/mechanik.2015.12.589 fatcat:dffbp7h76vhmbgysvukos6i3bq