HYBRID ULTRA-COMPACT 4TH ORDER BAND-PASS FILTERS BASED ON PIEZOELECTRIC ALN CONTOUR-MODE MEM RESONATORS

C. Zuo, N. Sinha, C.R. Perez, R. Mahameed, M.B. Pisani, G. Piazza
2008 2008 Solid-State, Actuators, and Microsystems Workshop Technical Digest   unpublished
This work reports on the design, fabrication and testing of a new class of hybrid (filter design using combined electrical and mechanical coupling techniques) ultra-compact (800×120 µm) 4 th order band-pass filters based on piezoelectric Aluminum Nitride (AlN) contour-mode microelectromechanical (MEM) resonators. The demonstrated 110 MHz filter shows a low insertion loss of 5.2 dB in air, a high out-of-band rejection of 65 dB, a fractional bandwidth as high as 1.14% (hard to obtain when only
more » ... obtain when only conventional electrical coupling is used in the AlN contour-mode technology), and unprecedented 30 dB and 50 dB shape factors of 1.93 and 2.36, respectively. All these are achieved in an extremely small footprint and by using just half the space that any other 4 th order filter would have taken. In terms of nonlinearities, the 110 MHz filter shows a 1 dB compression point higher than +63 dBmV and input third order intercept point (IIP 3 ) values well beyond +153 dBmV. This new hybrid design represents a net improvement over the state of the art and constitutes a very promising solution for intermediate frequency (IF) filtering in many wireless communication systems.
doi:10.31438/trf.hh2008.84 fatcat:jwkc2lst4rgsjkvge4lpo2ebau