Internet Archive Scholar

INVESTIGATION THE EFFECT OF BLADE'S SLOT ON ROTATING STALL OF HIGH SPEED BLOWER

Muna Sabah Kassim, Assistant Prof., Mechanical Engineering Department, Mustansiriyah University, Baghdad, Iraq, Fouad Aluan Saleh, Alaa Thayer Aliwi, Assistant Prof., Mechanical Engineering Department, Mustansiriyah University, Baghdad, Iraq, MSc.Student,Mechanical Engineering Department, Mustansiriyah University, Baghdad, Iraq
2019 Journal of Engineering and Sustainable Development  

Preserved Fulltext

fulltext thumbnail
Web Archive Capture PDF (1.6 MB)
https://web.archive.org/web/20201214031807/http://www.jeasd.org/images/2019edition/issue_4/12.pdf

A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL. The file type is application/pdf.

Experimental and numerical investigations to study the effect of add one slot to the impeller blades on the rotating stall and pressure fluctuations in a high speed centrifugal blower. The experimental test rig which includes a blower of centrifugal, transducer of pressure as well measurement instrumentations which constructed for this study. A data acquisition system (hardware) and its (software) have been developed to transfer the signal from transducer of pressure to the computer then
more » ... s with time. The experimental work has been implemented through measuring the static pressure variation as well fluctuating of pressure for two cases of impeller (without slot and with one slot). Static pressure has been taken in different points prepared on the front-wall of the volute casing along one track for two cases of the impeller. This track is angular track about the impeller. The results of experimental show that the fluctuations of pressure increase with the mass flow rate decrease. Also the results indicate that fluctuations of pressure decrease with adding slots into the impeller blades. The simulation of numerical has been carried out on blower of centrifugal into analysis both field of flow and fluctuations of pressure through using ANSYS (FLUENT 15). The simulation of numerical has been completed through solve the continuity and momentum equations with moving reference framework technique inside the blower. The numerical simulation results show a good agreement with the results of experimental.
doi:10.31272/jeasd.23.4.12 fatcat:kou46p4knferngpqizd2trcrem
DOAJ OJS
Citation

Muna Sabah Kassim, Assistant Prof., Mechanical Engineering Department, Mustansiriyah University, Baghdad, Iraq, Fouad Aluan Saleh, Alaa Thayer Aliwi, Assistant Prof., Mechanical Engineering Department, Mustansiriyah University, Baghdad, Iraq, MSc.Student,Mechanical Engineering Department, Mustansiriyah University, Baghdad, Iraq. "INVESTIGATION THE EFFECT OF BLADE'S SLOT ON ROTATING STALL OF HIGH SPEED BLOWER." Journal of Engineering and Sustainable Development 23.04 (2019) 170-186