Development of Nanocomposite Sensors for Smart Work holding System [article]

Allen Sandwell, University Of Calgary, Simon Park, Ron Hugo
The advent of Industry 4.0 necessitates developments of new sensor technologies. One of the emerging techniques of fabricating these new types of electronics and sensors is by depositing conductive inks and additional electrically active materials to serve as sensor layers onto flexible polymeric substrates. This study presents copper nanoparticle-based inks. The new formulation is developed that provides both oxidation resistance as well as improved flexibility with suitable rheological
more » ... ies for deposition using traditional screen-printing practices. To create a conductive matrix from the deposited ink, a sintering step is needed. Intense pulsed light (IPL) using a xenon flash lamp is used to sinter the ink. As the IPL sintering process is applied to the surface of the ink, the sintering process and resulting materials are analysed. The addition of polymeric nanocomposite-based films has significant benefits when used as the sensing layer. In this study we developed a sensing material comprised of (poly)vinylidene fluoride as a piezoelectric polymer matrix, along with carbon nanotubes to create an electrically conductive network. Exhibiting both piezoelectric and piezoresistive properties, the developed sensors are capable of measurement in a wide frequency band. The performance of these nanocomposite sensors was assessed as they are subject to an applied strain under both static and dynamic conditions. As an application for the printed sensors, we investigate their suitability as imbedded sensor systems for smart workholding. We present the design of a smart chuck (the SmartJaw) that can measure the gripping forces on a workpiece during machining operations on a lathe. Continuous monitoring of the jaw clamping forces provides the required feedback to minimize the likelihood of adverse events occurring. Analytical models are developed and presented that reconstruct the cutting forces based on the input jaw gripping forces and other parameters such as spindle speed, workpiece geometry and tool location. The [...]
doi:10.11575/prism/39602 fatcat:2lv77h37kfa5veczrqosc7s2iy