The first wall of a laser fusion chamber will experience high heat loads pulsed at 5-10 Hz with pulse widths on the order of a few microseconds. This poses a challenging problem for dry wall designs, as the wall will be susceptible to a variety of failure modes. The primary design concept of the High Average Power Laser (HAPL) project is a ferritic steel first wall coated with tungsten armor. Due to the extreme heat loads, the armor will experience high temperatures, extensive yielding, and

more »

... ace cracking. In order to evaluate the ability of this design to provide a suitable lifetime, a series of experiments to simulate chamber conditions using ions, xrays, infrared heating, and lasers is under way. These experimental efforts have been coupled with numerical modeling to help determine likely failure modes and establish design criteria for chambers. This paper compares models for the thermomechanical effects seen in the tests to those expected in a full power chamber, in order to assess the ability of the tests to mimic the actual chamber performance. The tests are found to have some limitations, but they still offer excellent approximations of the true behavior. I.