This report aims to model,simulate,perform the static and dynamic analysis and fabrication of a go kart chassis consisting of Circular beams. Modelling,simulations are performed using mo delling software i.e. PTC CREO 2 0 and analysis on ANSYS V 14.5 . The maximum deflection is determined by performing dynamic analysis. The chassis is designed such that it requires less material and as well as it is strong enough to withstand the various impacts on it. Strength and light weight were our basic

more »

... nsideration throughout the design of thechas sis of the kart. Hence,AISI 1018 was selected as an appropriate material for design which is a medium carbon steel with properties such as light weight,high tensile strength,high machinability,better weldability,etc. All the impacts and stresses were analysed by considering the severe working conditions and then the design was analysed in the analysis software. Step by step modifications in design were made as found necessary and as analysed on the software. After the complete analysis and the approval of design by inspecting it in all the modes of failure the design was finalized and was selected to fabricate which will not fail in any extreme criteria of stresses or load induced. https://www.ijiert.org/paper-details?paper_id=141204