The use of the steel mesh as reinforcement of asphalt pavements to combat reflective cracks by reflection is an alternative used since 1980 in European countries. A review of the literature on the use of the steel mesh in the rehabilitation of asphalt pavements shows that its use prevents the appearance of cracks acting as a barrier against its propagation, offers resistance to shearing especially under high tensions and also improves the resistance to fatigue contributing to the longevity of

more »

... e pavement. However, the potential if its use has been little investigated in Brazilian highways. In this context this project is to develop a new technology for road construction and rehabilitation. The idea is to use steel mesh reinforcement in asphalt roads in order to make road structures more cost effective by improving the lifetime of new constructed roads and by developing an optimal rehabilitation method for existing roads. For this, a research was performed aiming at the analysis of its performance in an experimental section located on the highway SP-354, in the State of São Paulo between the cities of Campo Limpo Paulista and Jarinu, based on the best international practices, using observation of its behavior in the field and laboratory, analysis by means of resilient modulus tests and calculations by backcalculation to verify the effect of the insertion of the screen, still proposing, a methodology of asphalt pavement design considering the range of integrated resilience module values with the screen and the structural deflection reduction factor (K) admissible for reinforcement projects. It was concluded that this reinforcing technique has potential for improvements crack propagation post-cracking behavior and permanent deformation in the asphalt concrete surfacing layer, with a ten fold increase on fatigue life to be expected. A model was developed that may be employed for pavement design modifying a model based on the use of conventional fatigue laws for the asphalt concrete, if the grid is positioned at the tensile zone of the surfacing layer. Finally, it was verified through a technical / economic study that the incorporation of the steel mesh in flexible pavements is an effective alternative and of adequate technical and economic viability.