1 Hit in 0.071 sec

Electrical Imaging for Geohazard and Environmental Monitoring

Vincenzo Lapenna, Sabatino Piscitelli, Pantelis Soupios
2012 International Journal of Geophysics  
A prototype system for time-lapse acquisition of 2D electrical resistivity tomography (ERT) and time domain reflectometry (TDR) measurements was installed in a test site affected by a landslide in Basilicata region (southern Italy). The aim of the system is to monitor in real-time the rainwater infiltration into the soil and obtain information about the variation of the water content in the first layers of the subsoil and the possible influence of this variation on landslide activity. A rain
more » ... activity. A rain gauge placed in the test site gives information on the rainfall intensity and frequency and suggests the acquisition time interval. The installed system and the preliminary results are presented in this paper. During the landslide emergency many kinds of data, even if preliminary, can help to better understand the complexity of the investigated phenomenon and to give a valid contribution to the successive damage valuation. The electrical resistivity tomography (ERT) method was applied for investigating the deep characteristics of a landslide body that occurred in March 2006 close to Potenza town in Basilicata region (southern Italy): the landslide slid on a road near some farmers' houses which had to be evacuated. The information obtained by the application of this indirect technique appeared to be particularly useful for end users involved in the risk management. The high resolution of the 2D ERT technique allowed the detection of possible sliding surfaces and the characterization of high water content areas in which the increase of the saturation degree and of pore pressures could cause a weakening of the slopes and a reactivation of the movement. Due to the comparison between ERT results and stratigraphical data from boreholes carried out in the area it was possible to decide on the adoption of other evacuation decrees. A geoelectrical survey was carried out in the Metapontum Forest Reserve located along the Ionian coast of the Basilicata region (Southern Italy). In this work we used the method of two-dimensional electrical resistivity tomography for obtaining highresolution electrical images in the investigated site. In particular, three electrical resistivity tomography, all orthogonal to the coastline, in the investigated area were carried out. To complete and integrate the geophysical data, soil and groundwater samplings, seventeen and five, respectively, were analyzed using chemical physical techniques. Geoelectrical survey, supported by laboratory analysis of soil and water samples have revealed the presence of a process of saltwater in coastal Forest Reserve of Metapontum, which have caused the decline of the existing pine forest with the consequent erosion and desertification problems. The results have disclosed the way to identify and discriminate large areas affected by intensive soil salinization and high resolution electrical images of the subsurface electrical resistivity plays a key role in delineating the saltwater intrusion front in coastal areas. Furthermore, our integrated study represents a contribution to the future programs for the protection, planning, and management of the terrestrial and marine resources in this coastal area. Direct current Resistivity (DCR) method was carried out to characterize the hydrogeological connection between the Tabular Middle Atlas (TMA) and the Saïs Basin. The TMA is one of the most important aquifers in northern Morocco that supplies the deep aquifer of the Saïs Basin. Electrical resistivity tomography (ERT) survey was focused on the Bittit area that is one of the most important outlet discharges, and it is representative of the relations between the TMA and the Saïs Basin. The high resolution capabilities of the electrical tomography were used to define the geological draining features in the framework of water paths from the TMA to the karstic springs. The synthetic data were calculated for the similar model expected in field data inversion and inversion result of these synthetic data used as a guide for the interpretation of the inverse data resistivity sections. Joint interpretation of geophysical, geological, structural, and synthetic simulation data allowed identifying a conductive horizontal shallow layer overlying two subvertical families of fractures of NE-SW and NW-SE directions. This result leads to propose hydrological behaviour of water from the Tabular Middle Atlas and the Saïs Basin at the Bittit Spring, which takes into account for both horizontal flows through stratification joints or karst and through subvertical fractures. Three measuring lines were arranged on one of free planes of magnetite cuboid samples. Apparent resistivity data were acquired by MIR-2007 resistivity meter when samples were under uniaxial compression of servocontrol YAW-5000F loadingmachine in laboratory. Then we constructed the residual resistivity images using electrical resistivity tomography (ERT) and plotted the diagrams of apparent resistivity anisotropy coefficient (ARAC) λ * and the included angle α between the major axis of apparent resistivity anisotropy ellipse and the axis of load with pressure and effective depth. Our results show that with increasing pressure, resistivity and the decreased (D region) and increased (I region) resistivity regions have complex behaviors, but when pressure is higher than a certain value, the average resistivity decrease and the area of D region expand gradually in all time with the increase of pressure, which may be significant to the monitoring and prediction of earthquake, volcanic activities, and large-scale geologic motions. The effects of pressure on λ * and α are not very outstanding for dry magnetite samples.
doi:10.1155/2012/786060 fatcat:jwnfkhqafzbphplmfqqd5rhusi