Filters








71 Hits in 3.2 sec

Standardization in cyber-physical systems: The ARUM case

Paulo Leitao, Jose Barbosa, Maria-Eleftheria Ch. Papadopoulou, Iakovos S. Venieris
2015 2015 IEEE International Conference on Industrial Technology (ICIT)  
Standardization assumes a critical role in the industrial adoption of cyberphysical systems, namely in the integration of legacy systems as well as the smooth migration from existing running systems to  ...  Cyber-physical systems concept supports the realization of the Industrie 4.0 vision towards the computerization of traditional industries, aiming to achieve intelligent and reconfigurable factories.  ...  ACKNOWLEDGMENT The research leading to these results has received funding from the European Union Seventh Framework Programme FP7 ARUM project, under grant agreement n° 314056.  ... 
doi:10.1109/icit.2015.7125539 dblp:conf/icit2/LeitaoBPV15 fatcat:3kmp2syksrclnprqegzukxekxy

Performance Improvement Based Authentication Protocol for Intervessel Traffic Service Data Exchange Format Protocol Based on U-Navigation System in WoT Environment

Byunggil Lee, Namje Park
2014 Journal of Applied Mathematics  
VTS (vessel traffic system) is an important marine traffic monitoring system which is designed to improve the safety and efficiency of navigation and the protection of the marine environment.  ...  The IVEF open source, however, is the code used to check the functions of standard protocols. It is too slow to be used in the field and requires a large memory.  ...  Acknowledgments This paper is extended and improved from accepted paper of CSA 2012 conferences.  ... 
doi:10.1155/2014/734768 fatcat:h2dmv4xlxfcdrljc37eximjiuq

A Review of ICT Applications in Construction

Ehab J. Adwan, Ali Al-Soufi
2018 JOIV: International Journal on Informatics Visualization  
In this review paper we compiled and demonstrated the trends and patterns of the research published on ICT Applications in the construction industry over the past two decades (1996-2016), through employing  ...  This paper reviews the utmost academic ICT applications and proposals/ initiatives in the construction industry taking an advantage of a previously generated research journal on ICT Technologies and Construction  ...  The project was based on the identification of the plate danger code. In addition, a prototype of an image acquisition system was set up in a toll-bar in France.  ... 
doi:10.30630/joiv.2.4.163 fatcat:lzhdllues5g4hdtxdu5uhm32ry

Toward Digitalization of Maritime Transport?

Pedro-Luis Sanchez-Gonzalez, David Díaz-Gutiérrez, Teresa Leo, Luis Núñez-Rivas
2019 Sensors  
in terms of research.  ...  It also provides insight into each of the three sectors into which this industry has been divided: Ship design and shipbuilding; shipping; and ports.  ...  Conflicts of Interest: The authors state that there are no conflicts of interest. Sensors 2019, 19, 926  ... 
doi:10.3390/s19040926 fatcat:yz5jiwb4ezgqfgwwekjevjzahu

An integrated framework for ship structural optimisation in contract design phase

Abbas Bayatfar, University of Liege, Jose Mishael, Renaud Warnotte, Philippe Rigo, University of Liege, University of Liege, University of Liege
2019 Analele Universităţii "Dunărea de Jos" din Galaţi. Fascicula XI, Construcţii navale/ Annals of "Dunărea de Jos" of Galati, Fascicle XI, Shipbuilding  
Constraints implemented in the optimization include relevant BV rules and shipyard requirements.The work is performed within the framework of European Union's HOLISHIP (2016)(2017)(2018)(2019)(2020) project  ...  This paper demonstrates the implementation of an integrated workflow for the finite element-based structural assessment/optimization of a 3D midship segment of RoPax vessel within the contract design phase  ...  Acknowledgements The authors wish to acknowledge the support provided by the H2020 project 'HOLISHIP-Holistic Optimization of Ship Design and Operation for Life Cycle' under contract no. 689074.  ... 
doi:10.35219/annugalshipbuilding.2019.42.15 fatcat:2oimdduc7jcwzgd26xqgayrxli

Research and Implementation of Artificial Intelligence in Welding Process Design

Jianwei Yuan
2017 Chemical Engineering Transactions  
Aiming at the conflict between access and storage due to the continuous accumulation of knowledge storage in the field of artificial intelligence in welding, the author uses RDF (Resource Description Framework  ...  ) to represent the technological knowledge of CO2 gas shielded welding, designs and implements a knowledge base based on Web semantic and stores it in HDFS, which is used to solve the difficulties of mass  ...  The Jena framework mainly reads and writes RDF, OWL, etc. in the form of RDF / XML and a set of triplets, and provides the storing of ontology data in the OWL file or the relational database, and in addition  ... 
doi:10.3303/cet1762109 doaj:526c41854dfa4766bf76cc9a896fcd14 fatcat:3tjns5j4efd4ngbfmuix4optsa

Developing a Digital Twin and Digital Thread Framework for an 'Industry 4.0' Shipyard

Toh Yen Pang, Juan D. Pelaez Restrepo, Chi-Tsun Cheng, Alim Yasin, Hailey Lim, Miro Miletic
2021 Applied Sciences  
The paper aims to report on the development of a new framework that combines the digital twin and digital thread for better data management in order to drive innovation, improve the production process  ...  It is envisaged that the framework will be applicable to enhancing the optimization of operational processes and traceability of information in the physical world, especially in an Industry Shipyard 4.0  ...  Acknowledgments: The authors thank the students who participated in this research. We also acknowledge the contributions of the staff of MEMKO Systems Pty Ltd.  ... 
doi:10.3390/app11031097 fatcat:6peqerehjrdbhd2fy2mn4nkv7y

Ontology for Systems Engineering

L.C. van Ruijven
2013 Procedia Computer Science  
The ontology represents an interpretation of the Systems Engineering processes as described in ISO 15288 (System Life Cycle Processes) by the author based on years of experience with this standard.  ...  Based on the information models and the set of relationships defined herein one can, in combination with a reference data library, specify, build or configure an information system or data exchange mechanism  ...  Fig. 18 . 18 Screen dump of the WEB application based on the presented ontology, build for a pilot project within the shipbuilding industry in the Netherlands.  ... 
doi:10.1016/j.procs.2013.01.040 fatcat:2wn67ppblnadhos73v3pdbs74e

Digital Twin-Driven Approach for Process Management and Traceability towards Ship Industry

Kan Wang, Qianqian Hu, Jialin Liu
2022 Processes  
This study proposes a combination of a DT approach and practical experiment as part of a five-tier framework for DT-driven process management in the ship industry.  ...  DT-based models and platforms are established in this study based on the basic modeling of Maya and scene rendering of Unity 3D.  ...  In addition, Kan Wang acknowledges the China Institute of Communications Education (JTYB20-60) for providing support.  ... 
doi:10.3390/pr10061083 fatcat:zcbdrjt7dbdb7am6rbdfa65jua

D6.1 STANDARDIZATION PLAN

Olga Radchuk
2021 Zenodo  
The Standardization Plan outlines the standardization roadmap for application of the Digital Twin concept in building and construction sector, based on the investigation of the standardization landscape  ...  This will contribute to the development of unified practices in the construction industry.  ...  Instead of introducing an XML Schema based on the UML models defined in ISO 19130 Part 1: Fundamentals Under development 145.  ... 
doi:10.5281/zenodo.4707097 fatcat:nenknyfprfg6ni4xfbkzwbxk5q

Digital enterprise technology--defining perspectives and research priorities

Pg Maropoulos
2003 International journal of computer integrated manufacturing (Print)  
The majority of research and commercial efforts in computer-based methods for design and manufacture relate to applications in Computer Aided Design (CAD), whilst research in Computer-Automated Process  ...  context of lifecycle management'.  ...  of Astrium to the initial definition of DET.  ... 
doi:10.1080/0951192031000115787 fatcat:ygj6hqpgpbbttcdc2gdj5fku7u

XML Schema for Implementing Safety Management System in Shipbuilding

Youhee Choi, Byungtae Jang
unpublished
Accordingly, plant owners request more for a safety management system in the process of offshore plant building.  ...  But, most of the safety management system is developed upon an assumption that such information is implicitly inherent within the system.  ...  Accordingly, safety management is essential task of project management in shipbuilding industry.  ... 
fatcat:jbn4pyb3zfaghfqjzo4plvna5a

Z-BRE4K strategies and policies

Gökan MAY, Polivios Raxis, Davide Baldisseri, Joaquín Piccini, Daniel Caljouw
2019 Zenodo  
RUL of assets, Z-MANAGE alarms and mitigation actions, and Z-SYNCHRONISE with shop floor operations and plant management systems, while ensuring the Z-SAFETY of workers.  ...  Starting with the existing (i.e. corrective and time-based preventive) maintenance policies and their particular strategies of ZBRE4K end-users SACMI, GESTAMP, and PHILIPS, the deliverable highlights the  ...  The risk-based maintenance framework is applied to each system in a facility and it is presented at When we are talking regarding the risk-based maintenance solutions (Pathak, 2018) , two key benefits  ... 
doi:10.5281/zenodo.3543565 fatcat:n6jzlw4vtrbnfcekqjowlrhucu

Intelligent BIM-based construction scheduling using discrete event simulation

Markus Konig, Christian Koch, Ilka Habenicht, Sven Spieckermann
2012 Proceedings Title: Proceedings of the 2012 Winter Simulation Conference (WSC)  
In the last years simulation approaches are increasingly used to support construction scheduling.  ...  For that purpose, different kinds of planning data have to be analyzed and integrated to perform realistic and suitable simulation, like building information models, bill of quantities, framework schedules  ...  ACKNOWLEDGMENTS The authors gratefully acknowledge the financial support of the German Federal Ministry of Education and Research for the MEFISTO project.  ... 
doi:10.1109/wsc.2012.6465232 dblp:conf/wsc/KonigKHS12 fatcat:rdeyuyqpxrcghhdvv3maycekpe

Contextualising manufacturing data for lifecycle decision-making

William Z. Bernstein, Thomas D. Hedberg Jr., Moneer Helu, Allison Barnard Feeney
2017 International Journal of Product Lifecycle Management  
In this paper, we explore opportunities for mapping standard data representations, such as the Standard for the Exchange of Product Data (STEP), MTConnect, and the Quality Information Framework (QIF) to  ...  To demonstrate this vision, we describe a reference implementation with a contract manufacturer in the National Institute of Standards and Technology (NIST) Smart Manufacturing Systems Test Bed.  ...  Xenia Fiorentini (Engisis) and the journal peer-reviewers for their review and comments.  ... 
doi:10.1504/ijplm.2017.090328 pmid:29911681 pmcid:PMC5998683 fatcat:rvp7qrq7krb3hlbdtmb5gsnoza
« Previous Showing results 1 — 15 out of 71 results