6,496 Hits in 4.8 sec

The application of computed tomography in the automotive world – how industrial CT works

2018 Technical Transactions  
This paper shows how industrial computed tomography (CT) works, its benefits and where it can be used in automotive world.  ...  As a non-destructive quality control technique (NDT), CT allows not only the measurement and evaluation of external and internal geometry, but is also useful for making reports with a visualisation of  ...  and 3-dimensional data, ▶ images are easier to interpret than conventional radiographic data, ▶ quality control tool for failure investigation and preproduction inspection, ▶ internal part inspection,  ... 
doi:10.4467/2353737xct.18.141.8980 fatcat:acpzgdpbwbff3oli4jaxfv2bb4

Visualization Software for CT: Fan/Cone Beam and Metrology Applications

L. Franco, P.G. Tahoces, J.A. Martínez-Mera
2013 Procedia Engineering  
This paper presents the high-performance capabilities developed in specific software for industrial computed tomography (CT) applications.  ...  The Technology Center AIMEN has developed in the last years a computed tomography system, in collaboration with the USC, for non-destructive testing and metrology purposes.  ...  Computed tomography Computed tomography is a NDT radiographic method, based on the x-ray transmission through the piece to inspect.  ... 
doi:10.1016/j.proeng.2013.08.266 fatcat:7rmicgv6zbd4vfij4sp6cznhhi

CTIMS: Automated Defect Detection Framework Using Computed Tomography

Hossam A. Gabbar, Abderrazak Chahid, Md. Jamiul Alam Khan, Oluwabukola Grace Adegboro, Matthew Immanuel Samson
2022 Applied Sciences  
Non-Destructive Testing (NDT) is one of the inspection techniques used in industrial tool inspection for quality and safety control.  ...  It is performed mainly using X-ray Computed Tomography (CT) to scan the internal structure of the tools and detect the potential defects.  ...  In this paper, a new CTIMS-Toolbox is proposed for X-ray Computed Tomography (CT) data inspection.  ... 
doi:10.3390/app12042175 fatcat:mfypjtzsobgkxl54ipgdhnpeee


Teodor Toth, Radovan Hudak, Jozef Zivcak
2015 Kvalita Inovácia Prosperita  
The article deals with the application of the industrial computer tomography within the process of inspection and verification of selected custom-made implant types.  ...  Originality/Value of paper: Currently, the verification of a manufactured implant can be carried out using 3D scanners and the industrial computed tomography.  ...  These tomography equipment are suitable for metrological purposes, facilitating the inspection of not only external product dimensions but also the product volume.  ... 
doi:10.12776/qip.v19i1.393 fatcat:2fk3qb2ux5bxrla2dgbppt4ibi

Application of biomedical metrotomography

R. Hudak, P. Kat'uch, J. Zivcak
2011 2011 15th IEEE International Conference on Intelligent Engineering Systems  
Computed tomography scanners (or CT scanners) are very popular medical equipments for tens of years.  ...  Presented paper describes metrological possibilities of industrial tomography in the area of biomedical engineering in order to hardware limitations and software functions.  ...  Another twenty years later computer tomography (CT) has become a powerful, well accepted tool in industrial applications as well.  ... 
doi:10.1109/ines.2011.5954782 fatcat:5evdw65ydffythl65kaa2younm

Automated seed testing by 3D X-ray computed tomography

Felix Porsch
2020 Seed science and technology  
In this paper, a fully automated CT-scanner is presented, which has been developed for testing of sugar beet seeds in industrial production environment.  ...  Quantitative measures of various characteristics of the parts of the seed (volume, thickness, weight) for each individual seed of a sample of 400 seeds are obtained.  ...  Introduction Computed tomography (CT) is a non-destructive inspection method, which is now in common use in medicine as well as in industry for development and critical production processes (Carmignato  ... 
doi:10.15258/sst.2020.48.1.10 fatcat:2mxrnbjdrza5vg6hckf5pfpupq

Page 69 of American Ceramic Society Bulletin Vol. 72, Issue 11 [page]

1993 American Ceramic Society Bulletin  
For the manufacturers of ceramic components, microstructural devel- *Member, American Ceramic Society VOLUME 72, No. 11, NOVEMBER 1993 Radiography X-ray source Computed tomography Detector array | X-ray  ...  d\) ral Feature MANUFACTURING X-ray Computed Tomography for the Testing and Evaluation of Ceramic Processes es X-ray computed tomography (CT), a nondestructive evaluation technique, generates high-resolution  ... 

Application of Industrial Computer Tomography to Determine Wood Porosity

Eva Buranská, Peter Rantuch, Ivan Buranský, Alexandra Kucmanová
2021 Research Papers. Faculty of Materials Science and Technology. Slovak University of Technology in Trnava  
The main objective of this research was to analyse the limitations of iCT - industrial computer tomography for measuring the wood pores characteristics as a new non-destructive method which is primarily  ...  intended to measure and inspect complete components primarily made of plastics or light metal.  ...  It is an industrial computed tomography system for measuring and inspecting complete components primarily made of plastics or light metal. Specification of data acquisition is available in Table 2 .  ... 
doi:10.2478/rput-2021-0020 fatcat:hxfvn4arnvcbzdrhqdlwkp5cta

51459 Computed tomography imaging for nondestructive evaluation

C.V. Kropas, M.E. Hughes
1994 NDT & E international  
INTRODUCTION X-ray Computed Tomography (CT) is a relatively new Nondestructive Evaluation (NDE) technique in industry.  ...  Application areas for CT cover a broad spectrum of objects, for both the Air Force and industry.  ... 
doi:10.1016/0963-8695(94)90363-8 fatcat:2pyqh5wbhzhwlkqfso3xvjfi5e

Digital Radiography/Computed Tomography of Medical Devices

James Troedel
2017 Microscopy and Microanalysis  
Digital radiography (DR) paired with computed tomography (CT) represents all of these tools without their limitations in one package thereby providing a higher level of understanding of the part or process  ...  inspection or produce a polygon file for production a 3D printed model of the device.  ... 
doi:10.1017/s1431927617006663 fatcat:w2lqcf5tbvg75nk5vf2yctdtwy

Applications of Metrotomography in Biomedical Engineering [chapter]

Radovan Hudk, Jozef ivk, Richard L.
2012 Biomedical Engineering - Technical Applications in Medicine  
Eighty years later computer tomography (CT) was first tested, and it has since become a powerful tool well-accepted in industrial applications.  ...  VG Studio Max, as well as other related applications, offers useful tools and methods for data visualization.  ... 
doi:10.5772/50713 fatcat:mc45xjxddbabjo45frkpk5jjaa

Microfocus X-Ray Computed Tomography (CT) Analysis Of Laser Sintered Parts

Anton Du Plessis
2014 South African Journal of Industrial Engineering  
Microfocus X-ray computed tomography (CT) scanning is a three-dimensional (3D) nondestructive technique that is useful in many research and technology fields.  ...  Similar to twodimensional (2D) X-ray inspections, this 3D technology allows the investigation of almost any material down to 1 micron spatial resolution and higher.  ...  ACKNOWLEDGEMENT We acknowledge VSG Avizo Fire and VG Studio Max for demo versions of their software and support. We also acknowledge financial support from the NRF and from Stellenbosch University.  ... 
doi:10.7166/25-1-663 fatcat:ih57pf4cv5hyphxgud3m7po7ei

Potential of computed tomography for inspection of aircraft components

Stephen G. Azevedo, Harry E. Martz, Daniel J. Schneberk, Michael T. Valley, Nancy K. Del Grande, Albert S. Kobayashi
1993 Nondestructive Inspection of Aging Aircraft  
ABSTRACT Computed Tomography (CT) using penetrating radiation (x-or gamma-rays) can be used in a number of aircraft applications.  ...  However, we are pursuing recent limited-data techniques using object model information to obtain useful data from the partial information acquired.  ...  SUMMARY Computed tomography is a powerful tool for imaging the internal structure of aging aircraft parts.  ... 
doi:10.1117/12.163854 fatcat:tefyryqj7rhjhibq7ubf5e2iu4

X-Ray Computed Tomography Application Research [chapter]

S. Trent Neel, Robert N. Yancey
1996 Review of Progress in Quantitative Nondestructive Evaluation  
Carl Iuroff of Allied-Signal for his assistance with the dimensional measurement project.  ...  Computed Tomography Computed tomography employs a finely collimated X-ray beam, a detector package, and computer algorithms to inspect planes within the object [1] .  ...  A study was conducted at the Computed Tomography Research Facility to determine the feasibility of using CT for dimensional inspections [2] .  ... 
doi:10.1007/978-1-4613-0383-1_63 fatcat:rnmbcjfuinhy7farwhjb3ri36a

Design of a Computed Tomography Automation Architecture

Nicholas Hashem, Mitchell Pryor, Derek Haas, James Hunter
2021 Applied Sciences  
Computed tomography (CT) is a non-destructive testing (NDT) technique in that the imaging and inspection are performed without damaging the sample, allowing for additional or repeated analysis if necessary  ...  This paper presents a literature review on techniques related to the computed tomography procedure that incorporate automation elements in their research investigations or industrial applications.  ...  Acknowledgments: The authors would like to thank the colleagues at Los Alamos National Laboratory for supporting this research. Conflicts of Interest: The authors declare no conflict of interest.  ... 
doi:10.3390/app11062858 fatcat:7zaj2ubcn5ei5p5pnovnjndgeq
« Previous Showing results 1 — 15 out of 6,496 results