Filters








2,128 Hits in 3.2 sec

Generic simulation of automotive assembly for interoperability testing

Deogratias Kibira, Charles R. McLean
2007 2007 Winter Simulation Conference  
automotive manufacturing.  ...  These simulations are being developed at four different levels: the supply chain, the assembly plant, the engineering systems, and the shop floor level.  ...  The automotive production process consists of three major sections: the body shop, the paint shop, and the trim assembly shop.  ... 
doi:10.1109/wsc.2007.4419702 dblp:conf/wsc/KibiraM07 fatcat:47p24fqodjhoffijtzixciwzqa

Modelling Electrical Energy Consumption in Automotive Paint Shop

Muchamad Oktaviandri, Aidil Shafiza Bin Safiee
2018 IOP Conference Series: Materials Science and Engineering  
Meanwhile, in automotive industry, paint shop is considered the most energy consumer area which is reported consuming about 50%-70% of overall automotive plant consumption.  ...  Hence, this project aims at providing a tool to model and simulate energy consumption at paint shop area by conducting a case study at XYZ Company, one of the automotive companies located at Pekan, Pahang  ...  Acknowledgement The authors are grateful to the Jabatan Penyelidikan dan Inovasi, Universiti Malaysia Pahang, for financial support under RDU1703157.  ... 
doi:10.1088/1757-899x/319/1/012060 fatcat:7hxjd6tb5fgxzbpdy5tr6yuihi

Page 174 of Finishing Today Vol. 62, Issue 8 [page]

1986 Finishing Today  
The project includes a 50- by 20-ft automotive booth with three coating zones, seven product development lab- oratories, classroom and training work- shop, two customer conference rooms, a lab manager's  ...  The design permits “fixing” of the Turbobells for virtually any body size at 90 degrees to the ver- tical side surface.  ... 

A review of the current automotive manufacturing practice from an energy perspective

A. Giampieri, J. Ling-Chin, Z. Ma, A. Smallbone, A.P. Roskilly
2020 Applied Energy  
heat sources that are extensively present in the whole plant and in the paint shop.  ...  Then, the paint shop is described as being responsible for the highest energy consumption in the production process, focusing on components, paints and energy utilisation.  ...  Acknowledgements The work presented in this article is delivered as a research outcome of the project supported by Research Councils UK (RCUK) for the Thermal Energy Challenge Network (EP/P005667/1) and  ... 
doi:10.1016/j.apenergy.2019.114074 fatcat:eqidahxcg5d5llcbkdbdjbmtme

Page 26 of Finishing Today Vol. 76, Issue 4 [page]

2000 Finishing Today  
Changes in the paint shops of auto- motive manufacturers don’t occur overnight. But when changes do come, the benefits are almost immediate.  ...  The LEPC is one of 12 research groups under the United States Council for Automotive Research (USCAR), which coordinates cooperative research proj- ects for DaimlerChrysler, Ford and GM.  ... 

A framework concept for data visualization and structuring in a complex production process

Anton Albo, Kristofer Bengtsson, Martin Dahl, Petter Falkman
2019 Procedia Manufacturing  
The concept is tested and validated on a smaller simulation of a paint booth with several interconnected and supporting control systems to prove the functionality and usefulness in this kind of production  ...  The concept is tested and validated on a smaller simulation of a paint booth with several interconnected and supporting control systems to prove the functionality and usefulness in this kind of production  ...  The complexity in a paint shop The paint application procedure in an automotive industry is a sensitive process that aims to achieve the right product quality and at the same time reduce process cycle  ... 
doi:10.1016/j.promfg.2020.01.120 fatcat:rnbi34aqk5filooazo2orlla3i

Page 176 of Finishing Today Vol. 64, Issue 2 [page]

1988 Finishing Today  
Exhaustive and practical, this volume will prove useful from the approach of safety all the way to expansion cf waterborne coatings into the automotive industry. $34.95 (CO-42) The Keys to Excellence New  ...  ) = through measurement © systems, basic algebra for shop-formula solv- ing skills, practical ge- ometry with shop ex- amples and applications, and trigo- nometry, emphasizing its valuable use in the shop  ... 

Page 167 of Finishing Today Vol. 63, Issue 11 [page]

1987 Finishing Today  
Knoll tells of a job shop that coats frames for eyeglasses in many colors as an example of a customer who buys in small quantities. If the coatings are custom-formulated, the minimum order is 220 Ib.  ...  Most of Pratt and Lambert's automotive coatings are for under-hood parts. In the appliance market, Pratt and Lambert is looking at modified acrylic systems.  ... 

Page 189 of Finishing Today Vol. 56, Issue 12 [page]

1980 Finishing Today  
Schneberger, Chairman of the Materials Science Department of General Motors Institute, this book covers virtually every facet of paint and paint application.  ...  COATING EQUI E MENT, FOU Ws SOS The January issue of Industrial Finishing will focus on what the coating equipment manufacturers are betting they will see in your finishing shops in the near future.  ... 

OPTIMIZATION OF TECHNOLOGICAL JIGS FLOW IN AUTOMOTIVE USING SOFTWARE MODULE TECNOMATIX PLANT SIMULATION

Miriam Pekarčíková, Peter Trebuňa, Marek Kliment, Milan Edl, Ladislav Rosocha
2020 Acta Logistica  
This paper deals with the optimization of the flow of technological jigs at the workplace of the paint shop in a company that is oriented to the automotive industry.  ...  Description and analysis of monitored flows of technological preparations are realized in the workplace Painting.  ...  Acknowledgement This article was created by implementation of the grant project APVV-17-0258 "Digital engineering elements application in innovation and optimization of production flows", VEGA 1/0438/20  ... 
doi:10.22306/al.v7i2.167 fatcat:vggldayb4nacjm5qnkuf6azkrm

Improving Energy Efficiency for the Vehicle Assembly Industry: A Discrete Event Simulation Approach

Abduaziz Oumer, Samson Mekbib Atnaw, Jack Kie Cheng, Lakveer Singh
2016 IOP Conference Series: Materials Science and Engineering  
The model depicts the performance measurement for processspecific energy measures of painting, welding, and assembling processes.  ...  The paper starts with an overview of challenges in energy consumption within the facilities of automotive assembly line and highlights the parameters for energy efficiency.  ...  Figure 4 , the paint shop sub-model occurs right after the BIW (body shop) sub-model. In this facility, the task of automotive painting process is conducted.  ... 
doi:10.1088/1757-899x/160/1/012069 fatcat:ejpbb4vpuvdkzpal34nrkfviym

Multi-objectives and Simulation Models for Develop Production Line in Automobiles Manufacturing System

2011 Chinese Business Review  
Automotive manufacturing is complex and includes the coordination of design in the manufacturing system.  ...  The both models are being developed at three different levels: the production line in the body and assembly shop, supply chain, and the production plan.  ...  The automotive production process consists of three major sections: the body shop, the paint shop, and the trim assembly shop.  ... 
doi:10.17265/1537-1506/2011.07.009 fatcat:yt3mdndwefetfcemnmjr2l7ib4

Page 63 of Ranch and Rural Living Vol. 41, Issue 8 [page]

1961 Ranch and Rural Living  
GRAY’S PAINT & BODY SHOP AUTOMOTIVE PAINTING AND REPAIRING Ph. 7608 2503 Sherwood Way San Angelo, Texas MITC AWNINGS ALL TYPES TRAILER COVERS Canvas Repairs Irrigation Canvas Awnings—Metal and Canvas  ...  AUTOMOTIVE HAVE YOUR CAR SERVICED WHILE YOU SHOP DOWNTOWN AROUND THE CORNER FROM THE CACTUS HOTEL MOOREHEAD & SON’S Downtown Mobil Service 101 E. Beauregard Phone 26616 Also 1425 N.  ... 

Design and Analysis of Automobiles Manufacturing System Based on Simulation Model

Razman Bin Mat Tahar, Ali Asghar J.Adham
2010 Modern Applied Science  
The global financial crisis, brewing for a while, really started to show its in automobiles Automotive manufacturing is complex and includes the coordination of design and manufacturing.  ...  The model is being developed at two different levels: the supply chain, the assembly plant. A solution that may optimize one performance measure may deteriorate other performance solution difficult.  ...  Generally, the automotive production process consists of three major sections: the body shop, the paint shop, and the trim assembly shop.  ... 
doi:10.5539/mas.v4n7p130 fatcat:fstglsg5vnflta5jz42qtb7d5m

An automotive supply chain model for a demand-driven environment

Intaher M. Ambe, Johanna A. Badenhorst-Weiss
2011 Journal of Transport and Supply Chain Management  
The purpose of this article is to demonstrate the development of a supply chain model for the automotive industry that would respond to changing consumer demand.  ...  The article is based on theoretical reviews and suggests guidelines for the implementation of an automotive supply chain model for a demand-driven environment.  ...  , 2009 ). shop; 3) painting the car body in the paint shop; and 4) the final assembly of the car, where the painted body, engine, transmission and further equipment are brought together or built in for  ... 
doi:10.4102/jtscm.v5i1.18 fatcat:wwips4n2rfhhnnquyummqyljxm
« Previous Showing results 1 — 15 out of 2,128 results