43,198 Hits in 3.9 sec

Sensor Service Selection through Switch Options

Sahin Cem Geyik, Boleslaw Szymanski, Petros Zerfos, Abbe Mowshowitz
2011 2011 IEEE International Conference on Services Computing  
In this paper, we propose to use real options theory for selecting component services.  ...  Furthermore, we compare our approach with several service selection methods and show the advantage of the option-based methodology.  ...  In the following Section III, we present our method of making service selections through the use of switch options. Evaluation of our methodology is discussed in Section IV.  ... 
doi:10.1109/scc.2011.41 dblp:conf/IEEEscc/GeyikSZM11 fatcat:th5z6ksdivagzcibftjzzsfnbi

Market mechanisms for resource allocation in pervasive sensor applications

Sahin Cem Geyik, S. Yousaf Shah, Boleslaw K. Szymanski, Sanmay Das, Petros Zerfos
2012 Pervasive and Mobile Computing  
We use two market mechanisms: auctions at individual sensor nodes to optimize routing, and switch options to optimize dynamic selection of sensor network services as well as switching between modes of  ...  The unique challenge of pervasive sensor applications that we address is the need for adjusting resource allocation in response to the changing application requirements and evolving sensor network conditions  ...  of switch options to service selection, we chose a covered parking garage monitoring network.  ... 
doi:10.1016/j.pmcj.2012.03.004 fatcat:63o4lzbfkjakxlfsgz2kw2hjbi

Market mechanisms for Value of Information driven resource allocation in Sensor Networks

Boleslaw Szymanski, S. Yousaf Shah, Sahin Cem Geyik, Sanmay Das, Meenal Chhabra, Petros Zerfos
2011 2011 IEEE International Conference on Pervasive Computing and Communications Workshops (PERCOM Workshops)  
We discuss the use of switch options to address some of the challenges arising in such dynamic service composition.  ...  The middle level focuses on services that are abstractions of applications running on sensors. Complex applications are composed automatically from basic ones.  ...  SWITCH OPTIONS FOR DYNAMIC SERVICE COMPOSITION Dynamic service composition for sensor networks was originally introduced by Geyik et al.  ... 
doi:10.1109/percomw.2011.5766871 dblp:conf/percom/SzymanskiSGDCZ11 fatcat:uui5cnbcqjcbplh5yygcxs2xty

Design and implementation of intelligent home control systems based on active sensor networks

Changsu Suh, Young-Bae Ko
2008 IEEE transactions on consumer electronics  
This paper introduces the proposed home control system's design that provides intelligent services for users. We demonstrate its implementation using a real testbed. 1  ...  Developing this trend, we suggest a new intelligent home control system based on a wireless sensor/actuator network (we call it as an "Active sensor network").  ...  Fig. 4 Our Smart Node and its Options Modules Fig. 5 Selected Pictures of Sensor/Actuator Nodes in Real House These pictures are uploaded to the web-server, so inhabitants can see from anywhere.  ... 
doi:10.1109/tce.2008.4637604 fatcat:ufczs54a5jbpbidgk6x2rkdceu

New Bifunctional Diarylethene Sensor for Multianalyte Detection and Al3+ Imaging in Live Cells

Renjie Wang, Lu Diao, Qiwei Ren, Gang Liu, Shouzhi Pu
2019 ACS Omega  
Therefore, 1O could be served as a selective fluorescence “Off-On” sensor for detection of Al 3+ , and a “On-Off” fluorescence switch could be also realized by using 1O –Al 3+ complex to recognize Cu 2  ...  origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC28XitFCmsbzK&md5=fda79c152a63f75404fc17fa70ea33d9A highly selective fluorescent sensor for Cd2+ based on a new diarylethene with a 1,8-naphthyridine  ... 
doi:10.1021/acsomega.8b02539 fatcat:7a4wfcxa3fgbxbvm2b6rh5csrm


2014 Journal of Computer Science  
In this study, energy conservation by forming a network of smart objects, communicating through central unit via IP address is focused.  ...  Fig. 7 .Fig. 8 . 78 Sensor side interface in IoT Device side interfaced in IOT Fig. 8 .Fig. 9 . 89 Selected option (2) Mail ID and sensor IOT (3) sensor IOT sent mailbox Selected option (2) sent mail  ...  Selected option, mail id and sensor IoT sent mailbox are shown as 1, 2 and 3 in the snapshots. The Fig. 10 shows the mail box of Device IoT.  ... 
doi:10.3844/jcssp.2014.1819.1826 fatcat:ygujh5iorndqdh2buza5heinuu

Power management in the EPOS system

Geovani Ricardo Wiedenhoft, Lucas Francisco Wanner, Giovani Gracioli, Antônio Augusto Fröhlich
2008 ACM SIGOPS Operating Systems Review  
However, the design and implementation of these strategies in embedded operating system often fail to deal with real-time and quality-of-service (QoS) requirements.  ...  At runtime, a preemptive scheduler for imprecise tasks prevents the execution of optional subtasks whenever there is the possibility of deadline loss or depletion of the energy source.  ...  such as alarms, context switches and the scheduler itself.  ... 
doi:10.1145/1453775.1453789 fatcat:vf4eqfc6zjhonixolrkxe4htzq

IOT based Irrigation Automation and Nutrient Recommendation System

Nihar M. Ranjan
2018 International Journal for Research in Applied Science and Engineering Technology  
Values received from moisture sensors are compared with the available datasets and amount to be released is calculated.  ...  RESULT After selecting the one of the options, the resulting page will show the detailed information about the same.  ...  After logging in, the user will have two options available for selection about either checking water level or nutrient recommender.  ... 
doi:10.22214/ijraset.2018.6117 fatcat:mffbez642faynmq2tpvojalufa

IoT Platform for Energy Sustainability in University Campuses

Pedro Moura, José Ignacio Moreno, Gregorio López López, Manuel Alvarez-Campana
2021 Sensors  
Furthermore, the paper presents the developed IoT-based platform, as well as the implemented services.  ...  To ensure the implementation of the desired monitoring and control, an internet of things (IoT) platform based on wireless sensor network (WSN) infrastructure was designed and installed.  ...  Sensors 2021, 21, x FOR PEER REVIEW 5 of 2 energy services.  ... 
doi:10.3390/s21020357 pmid:33430244 fatcat:yjarh242lzefrdg5ogdqa7q3mu

More about standby generator grounding, GFP, and currents that go bump in the night

H.O. Nash
1997 IEEE transactions on industry applications  
Incorrect generator grounding and/or incorrect transfer switch selection can result in noncode-complying installations, intermingling of ground and neutral currents, and possible incorrect ground-fault  ...  In order to properly ground multiple service and multiple generator installations, the electrical design engineer must have an in-depth understanding of all of the variables involved.  ...  TABLE II TRANSFER II SITCH AND GROUNDING OPTIONS FOR SINGLE AND MULTIPLE SERVICES  ... 
doi:10.1109/28.585847 fatcat:7gkyp3kzivhtzk53asrofo3n6e

Sensors in a smart room: Preliminary study

Rustam Kadirov, Evgeny Cvetkov, Dmitry Korzun
2012 2012 12th Conference of Open Innovations Association (FRUCT)  
First, we selected classes of sensors for use in PetrSU smart rooms. Second, we introduce an ontological model for representing sensor-related data in smart spaces.  ...  An important component of such rooms is sensors, which allow monitoring the current physical environment state. This paper reports our work-in-progress results on sensor use in PetrSU smart rooms.  ...  We identify the following two options for the realization. Both options can be applied for smart room, depending on a service the sensors implements. The first option is centralized.  ... 
doi:10.23919/fruct.2012.8122084 dblp:conf/fruct/KadirovCK12 fatcat:jvlcqqygpzathanqwohjquz6au

PC-Based Data Acquisition Program for an Electric Motor Dynamometer

L. E. Wagner, A. J. Heber, J. P. Harner
1990 Applied Engineering in Agriculture  
External range switch settings on the V-A-W meter cannot be read by the data acquisition system. However, these settings can be entered through the V-A-W switch settings configuration option.  ...  A continually updated display of the excitation voltage measured through a resistor voltage divider network can be selected for calibration verification.  ... 
doi:10.13031/2013.26442 fatcat:pti2dx7l3zfs7ezxwlvq7msjue

Design and deployment of a new wireless sensor node platform for building environmental monitoring and control

Essa Jafer, Rostislav Spinar, Paul Stack, Cian O'Mathuna, Dirk Pesch
2011 EAI Endorsed Transactions on Ambient Systems  
The sensors were selected carefully to meet both the building monitoring and design requirements.  ...  The majority of today's buildings are insufficiently sensored to obtain an unambiguous understanding of performance.  ...  Sensors selection In this section, the different types of sensors and interface design options selected for the building monitoring application are illustrated. Occupation sensor (passive infrared).  ... 
doi:10.4108/trans.amsys.2011.e3 fatcat:eyxxu4drfrgdrokwushfcfs34e

A Personal Mobility Assistant based on Ambient Intelligence to Promote Sustainable Travel Choices

Daniele Magliocchetti, Martin Gielow, Federico De Vigili, Giuseppe Conti, Raffaele De Amicis
2011 Procedia Computer Science  
this assumption, this paper presents a so-called personal mobility assistant, i.e. a software for smartphones and tablets which promotes use of public transport by helping user identify the best travel option  ...  across a multi-modal transport network, through a user-friendly interface that intelligently adjusts to user preferences and to contextual information.  ...  Acknowledgements The work presented in this paper have received funding from the EC through the Seventh Framework Programme under the Grant Agreement n. 234239 (project "i-Tour -intelligent Transport system  ... 
doi:10.1016/j.procs.2011.07.124 fatcat:kxz3lc73vnftbi35iuvida2tpm

Providing disabled persons in developing countries access to computer games through a novel gaming input device

Andrew Cyrus Smith, Chris Krause
2011 International Journal on Disability and Human Development  
Sensor closure events emanating from the slider assembly are made available to the software through the joystick USB interface.  ...  Our input device only makes use of the five spatially distributed switches. The two analogue sensors and "hat" switch are not used in our design.  ... 
doi:10.1515/ijdhd.2011.002 fatcat:pfzzfw6ovvgfpn3ixx5dfqd37e
« Previous Showing results 1 — 15 out of 43,198 results