A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf
.
Filters
Real-time data-driven detection of the rock type alteration during a directional drilling
[article]
2019
arXiv
pre-print
During the directional drilling, a bit may sometimes go to a nonproductive rock layer due to the gap about 20m between the bit and high-fidelity rock type sensors. ...
In this article, we present a data-driven procedure that utilizes MWD data for quick detection of changes in rock type. ...
Those rock-types were used as the target variable during the construction of data-driven models and assessment of these models.
III. METHODS
A. ...
arXiv:1903.11436v2
fatcat:4c5j6u3ixzg73n77mla56zi7ia
Multi-state autonomous drilling for lunar exploration
2016
Chinese Journal of Aeronautics
Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. ...
The results reveal that the multi-state control method is capable of detecting drilling state variation and adjusting drilling parameters timely under vibration interferences. ...
The control system of the test-bed collects the real-time data and controls drilling parameters during the drilling process. 25 The sensors in the test-bed are a torque sensor for rotary torque, load ...
doi:10.1016/j.cja.2016.01.004
fatcat:plx3h5br2rbjxkmdtezbhdqybm
Prediction and Early Detection of Karsts—An Overview of Methods and Technologies for Safer Drilling in Carbonates
2021
Energies
In particular, we consider acoustic, resistivity, seismic and drilling-data methods. ...
To improve drilling safety in intervals of karstification, it is important to detect karsts as early as possible, preferably in advance. ...
Drilling Data Method for Karst Detection The real-time identification of karsts and signs of karstification is possible based on the real-time drilling and mud-losses data. ...
doi:10.3390/en14206517
fatcat:4eqzp3t5jbcs7jhwrfbtt6rt5e
Time Series Fault Classification for Wave Propagation Systems with Sparse Fault Data
[article]
2022
arXiv
pre-print
Direct application of One-Nearest-Neighbor Dynamic Time Warping, a common technique for this kind of problem, and other machine learning techniques are shown to fail for this case and new methods to improve ...
By using relative features describing the difference from the reference case rather than the absolute time series, improvements are made compared to state-of-the-art time series classification algorithms ...
Acknowledgements The authors would like to thank Peder Haraldsson and Martin Persson, Epiroc Rock Drills AB, for assistance during data collection in this work. ...
arXiv:2203.16121v1
fatcat:efggnz4rv5bfdoei2zvjevaiqa
Computational monitoring in real time: review of methods and applications
2018
Geomechanics and Geophysics for Geo-Energy and Geo-Resources
The basic principles of the computational monitoring in real time are established. ...
To be effective, the monitoring response time needs to be commensurate with the characteristic time of variation of the processes being monitored e.g. from seconds as for example in some machinery, to ...
Acknowledgements The authors acknowledge the financial support from the Faculty of Engineering and Mathematical Sciences of the University of Western Australia. ...
doi:10.1007/s40948-018-0086-6
fatcat:y2rb3zjcp5gt3fndk4xuztlhpa
Horizontal Directional Drilling-Length Detection Technology While Drilling Based on Bi-Electro-Magnetic Sensing
2017
Sensors
Herein, a technique for real-time HDD length detection and a management system based on the electromagnetic detection method with a microprocessor and two magnetoresistive sensors employing the software ...
A combined test demonstrated the feasibility of the entire drilling-length detection system. ...
Acknowledgments: This research was funded by a grant from the National Natural Sciences Foundation of China (41672155). ...
doi:10.3390/s17050967
pmid:28448445
pmcid:PMC5464193
fatcat:br7pivc4yrbarl57zdahlenkxq
Expedition 357 methods
[chapter]
2017
Proceedings of the International Ocean Discovery Program
During deployments, real-time data streams of the temperature, pH, ORP, and methane sensors were monitored on board the ship using Sea-Bird software, logging the data points versus time. ...
Unlike wireline logging, the data were recorded to memory rather than transmitted in real time. ...
doi:10.14379/iodp.proc.357.102.2017
fatcat:drf7irfwpbhudkltvkrq7dkpqy
Expedition 357 summary
[chapter]
2017
Proceedings of the International Ocean Discovery Program
The rock drill sensor packages and water sampling enabled detection of elevated dissolved methane and hydrogen concentrations during and/or after drilling, with "hot spots" of hydrogen observed over Sites ...
To accomplish these objectives, we developed a coring and sampling strategy centered on the use of seabed drills-the first time that such systems have been used in the scientific ocean drilling programs ...
Data from these sensors were observable in real time during drilling operations. ...
doi:10.14379/iodp.proc.357.101.2017
fatcat:542rxdwhkzdq5dwmr3tuqz26ju
Prospects of Applying MWD Technology for Quality Management of Drilling and Blasting Operations at Mining Enterprises
2020
Minerals
course of data collection and analysis of drilling processes. ...
The study also presents a summary of existing approaches in the area of data validation and verification, applied up to the present day to cope with the problems of global MWD use in Mining and Construction ...
Introduction Measurement while drilling (MWD) is a state-of the-art technology that allows to measure and obtain various types of real-time data on the rock mass in the process of hole drilling. ...
doi:10.3390/min10100925
fatcat:i2b53oibj5dv7aagbcgbmeel7m
A review of mud pulse telemetry signal impairments modeling and suppression methods
2018
Journal of Petroleum Exploration and Production Technology
Exploration and drilling operations are the most costly and risky activities that require logging while drilling effective tool operation and high speed real-time data transmission. ...
Among other logging technologies, mud pulse telemetry has been widely adopted into real-time drilling and logging data measurements for deep formation evaluation decision-making. ...
This work was partly supported by the National Natural Science Foundation of China (Nos. 51604038, 51541408) and the Education Department of Hubei Province, China (D20141303). ...
doi:10.1007/s13202-018-0483-y
fatcat:obdv4ej5ynf7tdtgsnl3tbw5cq
Expedition 376 methods
[chapter]
2019
Proceedings of the International Ocean Discovery Program
During each logging run, real-time incoming data were recorded and monitored on the MCM MAXIS logging computer. ...
GPIT data are also used to provide real-time evaluation of the WHC (see Wireline heave compensator). ...
doi:10.14379/iodp.proc.376.102.2019
fatcat:gpgyzhsp3fcbxklclfgaof43ma
The 2005 MARTE Robotic Drilling Experiment in Río Tinto, Spain: Objectives, Approach, and Results of a Simulated Mission to Search for Life in the Martian Subsurface
2008
Astrobiology
Biosignatures were detected in 12 of 15 samples analyzed by SOLID2. Science teams correctly interpreted the nature of the deposits drilled as compared to the ground truth. ...
Two remotely located science teams analyzed the remote sensing data and chose subsample locations. In 30 days of operation, the drill penetrated to 6 m and collected 21 cores. ...
support during the extensive field work. ...
doi:10.1089/ast.2007.0217
pmid:19032053
fatcat:dz6eq5mxu5fkdmp7kb4rpdkyve
Best Practice Handbook For The Development Of Unconventionnal Geothermal Resources With A Focus On Enhanced Geothermal System
2008
Zenodo
The ENGINE work has been synthesized in a Best Practice Handbook presenting an overview of the investigation, exploration, and exploitation of unconventional geothermal reservoirs (UGR) and Enhanced Geothermal ...
The entire EGS life cycle is covered in four chapters: Chapter 1: Site investigation Chapter 2: Drilling, stimulation and reservoir assessment Chapter 3: Exploitation Chapter 4: Environmental and socioeconomic ...
defines the amount of heat flowing across a unit surface area during a time unit. ...
doi:10.5281/zenodo.1283279
fatcat:n55jsqfpfvbdbemf7l2kp7sr4a
Geometallurgy—A Route to More Resilient Mine Operations
2018
Minerals
to the integration of such data and knowledge into mine planning and scheduling. ...
Critically, through spatial identification of variability, it allows the development of strategies to mitigate the risks related to variability (e.g., collect additional data, revise the mine plan, adapt ...
Acknowledgments: The authors acknowledge a number of companies across Australia, Africa, the Americas, East Asia, and Europe for the opportunity to input into geometallurgical programmes. ...
doi:10.3390/min8120560
fatcat:jjrampovivgjbavtnkfc2xq7qu
Scientific Drilling Into the San Andreas Fault Zone—An Overview of SAFOD's First Five Years
2011
Scientific Drilling
Downhole measurements show that within 200 m (maximum) of the active fault trace, the direction of maximum horizontal stress remains at a high angle to the San Andreas Fault, consistent with other measurements ...
SAFOD is located near Parkfield, California and penetrates a section of the fault that is moving due to a combination of repeating microearthquakes and fault creep. ...
We would particularly like to thank Louis Capuano and Jim Hanson of ThermaSource, Inc., the prime drilling contractor, and the many individuals who served on the SAFOD Advisory Board and Technical Panels ...
doi:10.2204/iodp.sd.11.02.2011
fatcat:66xjffrbm5cbjgy56t5yiwdrie
« Previous
Showing results 1 — 15 out of 5,607 results