16 Hits in 4.0 sec

Analysis of Bandwidth Utilization for Wireless Mesh Networks

Nagendra Sah
2013 International Journal of Innovation Management and Technology  
The routing Protocol used here is On Demand Multicast Routing Protocol (ODMRP),DVMRP and PIM-DM.  ...  By simulation results, it is shown that the proposed protocol achieves high bandwidth utilization and throughput with reduced delay, when used in multicast routing protocols.  ...  PIM-DM (Protocol Independent Multicast-Dense Mode) This is PIM operating in dense mode (PIMDM), but the differences from PIM sparse mode (PIM-SM) are profound enough to consider the two modes separately  ... 
doi:10.7763/ijimt.2013.v4.456 fatcat:x23l4cq3fbc73m4yrg63ywwsfa

Enhanced Multicast Repair Fast Reroute Mechanism for Smart Sensors IoT and Network Infrastructure

Jozef Papan, Pavel Segec, Oleksandra Yeremenko, Ivana Bridova, Michal Hodon
2020 Sensors  
Modern Internet Protocol (IP) networks demand specific qualitative and quantitative parameters that need to be met. One of these requirements is the minimal packet loss in the network.  ...  This paper presents an Enhanced Multicast Repair (EM-REP) FRR mechanism that uses multicast technology to create an alternate backup path and does not require pre-calculation.  ...  The M-REP FRR mechanism uses a multicast [65] [66] [67] routing protocol, Protocol Independent Multicast-Dense Mode (PIM-DM), as its basis.  ... 
doi:10.3390/s20123428 pmid:32560532 pmcid:PMC7349792 fatcat:uvmhfxlo3jep3aj3oavewkfqvm

The core-assisted mesh protocol

J.J. Garcia-Luna-Aceves, E.L. Madruga
1999 IEEE Journal on Selected Areas in Communications  
The core-assisted mesh protocol (CAMP) is introduced for multicast routing in ad hoc networks.  ...  Within the multicast mesh of a group, packets from any source in the group are forwarded along the reverse shortest path to the source, just as in traditional multicast protocols based on source-based  ...  vector multicast routing protocol (DVMRP) or protocol independent 0733-8716/99$10.00 © 1999 IEEE multicast-dense mode (PIM-DM) do], or control packets [like the forwarding group multicast protocol (FGMP  ... 
doi:10.1109/49.779921 fatcat:zfkgskeeujfcxptjnjp5fkk3vu

Real-Time Multi-Auctions and the Agent-Support

Hong Liu, Shouhong Wang, Fei Teng
2000 Journal of Electronic Commerce Research  
A prototype of the agent, which is built with Java in the multicast environment, is further discussed.  ...  The prerequisite of the implementation of this new auction model is the integration of the multicast technology and software agent technology.  ...  Acknowledgement: The comments of three anonymous reviewers have contributed significantly to the revision of the paper.  ... 
dblp:journals/jecr/LiuWT00 fatcat:ave6buwkgzd6hh2k4xvuhekiii

Multipoint communication: a survey of protocols, functions, and mechanisms

C. Diot, W. Dabbous, J. Crowcroft
1997 IEEE Journal on Selected Areas in Communications  
This paper surveys protocol functions and mechanisms for data transmission within a group, from multicast routing problems up to end-to-end multipoint transmission control.  ...  PIM has two operating modes: sparse (SM) and dense (DM). • A group is said to be dense if group membership is plentiful within a region of an internet. PIM-DM implements RPF and prunes.  ...  In order to extend multicast support to wide area groups which may be either dense or sparse, to compliment DVMRP and CBT, the IETF Inter Domain Multicast Routing working group defined protocol independent  ... 
doi:10.1109/49.564128 fatcat:6gre3yoktvaknoilqj7bomi5um

Engineering multicast group key distribution: a review

C. Vidakis, M. Fleury
2005 IEE Proceedings - Software  
A considerable number of multicast group key distribution schemes have been proposed, for surveys refer to [16][19][20][9].  ...  The complex software structures and procedures to establish multicast group key distribution are analyzed, with resulting performance timings and trial applications reported.  ...  , Protocol Independent Multicast-Dense Mode (PIM-DM), PIM-Sparse Mode (PIM-SM) 3 , Distance Vector Multicast Routing Protocol (DVMRP), and Multicast Border Gateway Protocol (MBGP).  ... 
doi:10.1049/ip-sen:20045069 fatcat:jdcdgz7uu5hy5hi75erv2f7nl4

Internet Multicast Video Delivery

A. Ganjam, H. Zhang
2005 Proceedings of the IEEE  
IP and overlay multicast are two architectures proposed to provide multicast support.  ...  A large body of research has been done with IP multicast and QoS mechanisms for IP multicast since the late 1980s.  ...  Distance-vector multicast routing protocol (DVMRP) [2] , multicast open shortest path first (MOSPF) [7] , and protocol independent multicast-dense mode (PIM-DM) [8] use the RPM algorithm, while protocol  ... 
doi:10.1109/jproc.2004.839602 fatcat:ixh2d5qjonhrji2qjvj6654sne

In this issue

2015 Journal of family planning and reproductive health care  
Interdomain Multicast Currently there are four fairly widely deployed multicast routing protocols: PIM Dense Mode (PIM-DM), PIM-SM or Source-Specific Multicast (SSM), Multicast OSPF (MOSPF), and the Distance  ...  With service providers rolling out multicast using PIM-SM, connecting DVMRP and PIM-DM flood-and-prune is becoming common.  ...  The book gives a complete look around the protocols of the next generation: Resource Reservation Protocol (RSVP), Multiprotocol Label Switching (MPLS), and Real-Time Transport Protocol (RTP).  ... 
doi:10.1136/jfprhc-2015-101421 fatcat:4pj2fty4jbfuhj4qtyo5jklpn4

Designing Multicast Protocols for Non-Cooperative Networks

Weizhao Wang, Xiang-Yang Li, Yu Wang, Zheng Sun
2008 IEEE Journal on Selected Areas in Communications  
By assuming that every entity has a fixed cost for a specific multicast, we give a general framework to decide whether it is possible and how, if possible, to transform an existing multicast protocol to  ...  In this paper, we specifically show how to design truthful multicast protocols for non-cooperative networks such that these selfish entities will follow the protocols out of their own interests.  ...  A multicast routing protocol, such as Protocol Independent Multicast (PIM) dense mode, uses the multicast BGP database to perform Reverse Path Forwarding (RPF) lookups for multicast-capable sources.  ... 
doi:10.1109/jsac.2008.080920 fatcat:7fc7avuedjgdvi3pfhbkmd3hyq

Many-to-many multicast routing with temporal quality of service guarantees

Hung-Ying Tyan, J.C. Hou, Bin Wang
2003 IEEE transactions on computers  
Independent Multicast Dense Mode (PIM- DM) [5], and Multicast extensions to Open Shortest Path First Protocol (MOSPF) [6]; 2) the core-based multicast tree approach, e.g., the Core Based Tree (CBT) protocol  ...  [1] and the Protocol Independent Multicast Sparse Mode (PIM-SM) [5].  ... 
doi:10.1109/tc.2003.1204837 fatcat:7tdfmu7r3bfr7jsea7kijqytyq

On multicasting in wavelength-routing mesh networks

Ashraf Hamad, Tao Wu, Ahmed E. Kamal, Arun K. Somani
2006 Computer Networks  
Although multicasting has been studied extensively in different network environments, multicasting in this environment is different, and more involved.  ...  This paper considers multicasting on wavelength-routing mesh optical networks.  ...  It can be divided into two perspectives: sparse mode (PIM-SM) and dense mode (PIM-DM) [18, 19] , corresponding to receiver sets that are relatively dense (and constructs source-based tree) and sparse  ... 
doi:10.1016/j.comnet.2005.12.012 fatcat:avkuytxxv5b67ae4v3ypzxmhke

Multicast in MPLS Based Networks and VPNs

Hamir Riaz
Rosen (long time was in draft state) is PIM protocol based technology with some extensions for tunneling in VPN and NG MVPN, is a technique basing on BGP/MPLS IP VPN supporting Multicast service, that  ...  The application of MVPN technology is more and more adapted widely these days, the correlated technical standard has been revised for nearly ten years.  ...  Mode (PIM-DM) uses a flood and prune mechanism.  ... 
doi:10.7939/r3-c5xm-k074 fatcat:ox5vxgwuljderllgewl2iwxli4

Multicast-specific security threats and counter-measures

T. Ballardie, J. Crowcroft
Proceedings of the Symposium on Network and Distributed System Security  
Group communication seems to have re-opened the door to designing a set of protocols from the ground up, and the requirement for re-designing them from the services down.  ...  We would like to acknowledge useful comments also from Ken Carlberg, Tony Ballardie and Mark Handley. 25 • Multicast routing schemes may mean that it is more complex to determine which links are in use  ...  PIM has two operating modes: sparse (SM) and dense (DM). • A group is said to be dense if group membership is plentiful within a region of an internet. PIM-DM implements RPF and prunes.  ... 
doi:10.1109/ndss.1995.390649 dblp:conf/ndss/BallardieC95 fatcat:2k2yg7b7xvedjbuzzkiujphusy

Multicast Routing Protocols in MANET [chapter]

Javad Akbari Torkestani, Mohammad Reza Meybodi
Technological Advancements and Applications in Mobile Ad-Hoc Networks  
protocols.  ...  Generally speaking, this survey classifies the multicast routing protocols into four categories based on the underlying routing structure: tree-based, mesh-based, hybrid, and stateless multicast routing  ...  Protocol independent Multicast (PIM) operates in two modes: dense mode (PIM-DM) and sparse mode (PIM-SM). PIM-DM (Deering et al., 1999) proposed by Deering et al. operates similar to DVMRP.  ... 
doi:10.4018/978-1-4666-0321-9.ch002 fatcat:sucumktmnrcpxkg6csluksyvxi

Building an Internet Radio System with Interdisciplinary factored system for automatic content recommendation [article]

Krzysztof Wołk
2016 arXiv   pre-print
These can include: • IGMP -Internet Group Management Protocol, • MLD -Multicast Listener Discovery • PIM-SM -Protocol Independent Multicast -Sparse ModePIM-DM -Protocol Independent Multicast -Dense  ...  Mode • MRD -Multicast Router Discovery.  ... 
arXiv:1604.00233v1 fatcat:yu6p2rzq2zc6zhxkjlwyxpq3tm
« Previous Showing results 1 — 15 out of 16 results