A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2019; you can also visit the original URL.
The file type is application/pdf.
Filters
Noise analysis of a CDS circuit with offset canceling
2015
2015 IEEE 11th International Conference on ASIC (ASICON)
Preserved Fulltext
This paper presents a method of noise analysis for a CDS that has the function of offset canceling, which starts from the transient noise behavior due to noise models in each clock phase. ...
At last a time domain simulation(TDS) is applied to verify the feasibility of the noise analysis method we proposed, which corresponds well. ...
This paper presents a method of noise analysis for a CDS with offset canceling. ...
doi:10.1109/asicon.2015.7516914
dblp:conf/asicon/0005SX15
fatcat:dwdz27mdcjh4lbm5uor3tfadry
Optimization design for a CDS circuit with offset canceling
2017
2017 International Conference on Electron Devices and Solid-State Circuits (EDSSC)
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2019; you can also visit the original URL.
The file type is application/pdf.
This paper presents an optimization method for the noise performance of a CDS circuit, the advantage of which is its ability of canceling the offset of the OP involved. ...
The structure of the CDS circuit is analyzed with operation timing at first. ...
circuits. ...
doi:10.1109/edssc.2017.8126472
fatcat:4n5pophsgvbpnlwehh4xzmlfsq
Advantageous Sampling of Correlated Current Signals to Supress Fixed-Pattern Noise in CMOS Imagers
2017
Journal of Integrated Circuits and Systems
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Correlated Double Sampling (CDS) in voltage mode is a commonly used method to suppress the offset caused FPN. ...
Simulation and experiments showed a 40% FPN reduction with the fabricated CDS, whereas the improved simulated version ensures 90% FPN reduction. ...
Since FPN is mostly an offset and present in both, it can be cancelled by means of differential read-out [7] . This work proposes a new CDS circuit approach, which operates in current mode. ...
doi:10.29292/jics.v12i1.450
fatcat:kfulxb35jfa67ieryn34df54se
A Micropower Chopper—CDS Operational Amplifier
2010
IEEE Journal of Solid-State Circuits
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2021; you can also visit the original URL.
The file type is application/pdf.
The circuit achieves a simulated 168-dB DC gain with an overall current consumption of 14.4 A. ...
The measured offset voltage over the available samples results in a distribution with 2-V standard deviation. ...
CONCLUSION Low-power spur-free amplification with offset cancellation is obtained by the combined action of input chopping and CDS. ...
doi:10.1109/jssc.2010.2076430
fatcat:ncsfvgmgfjcj3pusoqlgn5grbi
Touch Screen Sensing Circuit with Rotating Auto-Zeroing Offset Cancellation
2015
Journal of information and communication convergence engineering
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2018; you can also visit the original URL.
The file type is application/pdf.
In this paper, we present a rotating auto-zeroing offset cancellation technique, which can improve the performance of touch screen sensing circuits. ...
Experimental results show that the proposed technique improves the signal-to-noise ratio by 14 dB compared to a conventional offset cancellation scheme. ...
Fig. 3 . 3 Transient simulation results of no-touched and with touch cases without using auto-zeroing: (a) for an ideal circuit with no offset and (b) for real circuits with an offset from the CMOS G m ...
doi:10.6109/jicce.2015.13.3.189
fatcat:gae3avj2dfh7xcp2idyiehbdje
A switched capacitor fully differential correlated double sampling circuit for CMOS image sensors
2011
2011 5th International Symposium on Medical Information and Communication Technology
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2015; you can also visit the original URL.
The file type is application/pdf.
However, without the noise reduction circuits, CMOS technology wouldn't be able to compete with CCDs. ...
In this paper, we propose a CDS architecture convenient for CMOS imagers that uses switched capacitor fully differential configuration which reduces the noise in the same way as the conventional CDS architectures ...
ACKNOWLEDGMENT The research work presented in this paper was funded by the NutriCHIP project with a grant from the Swiss Nano-Tera.ch initiative, evaluated by the Swiss National Science Foundation. ...
doi:10.1109/ismict.2011.5759808
fatcat:phl4sjokprfdbpsdv7qcjrdd7e
A wideband ultra-low-current on-chip ammeter
2012
Proceedings of the IEEE 2012 Custom Integrated Circuits Conference
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The circuit is capable of measuring an on-chip 50 fA current at a bandwidth up to 1 kHz with a noise floor of 0.227 fA rms /√Hz. A low leakage reset scheme is utilized to improve the precision. ...
Noise analysis is carried out and "capacitive noise matching" is proposed to minimize the noise floor. ...
Charge injection due to the opening of the reset switches in the integrator stage is sampled onto C1 along with the offset of the second stage and canceled out. ...
doi:10.1109/cicc.2012.6330668
dblp:conf/cicc/LuH12
fatcat:wk7l4gmc6rgrlakkoyk77i7ut4
Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated double sampling, and chopper stabilization
1996
Proceedings of the IEEE
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
In linear IC's fabricated in a low-voltage CMOS technology, the reduction of the dynamic range due to the dc offset and low-,frequency noise of the ampli$ers becomes increasingly significant. ...
Also, the achievable aniplijier gain is often quite low in such a technology, since cascoding may not be a practical circuit option due to the resulting reduction of the output signal swing. ...
Although the signal at the output of a circuit using CDS is now S/H, the effect of CDS on the amplifier offset and noise is very similar to that of the AZ process. ...
doi:10.1109/5.542410
fatcat:fempn6qbafawzer4oyncfcp52i
A New FPN Cancellation Circuit for Time-Domain CMOS Image Sensors
[chapter]
2015
Optoelectronics - Materials and Devices
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2019; you can also visit the original URL.
The file type is application/pdf.
A fixed-pattern noise correction technique for time-domain CMOS imagers with high dynamic range is presented in this chapter. ...
A simple electronic circuit is proposed to implement the technique. Circuit and simulation results are presented to demonstrate the feasibility of the proposed technique. ...
However, most of CMOS imager architecture with high dynamic range neglect the fixed-pattern noise (FPN) and do not present any kind of cancelling circuit or impact on such architectures. ...
doi:10.5772/60756
fatcat:rudplutxwnekdcmlr53eox25xe
Design techniques for high-speed, high-resolution comparators
1992
IEEE Journal of Solid-State Circuits
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
In the CMOS comparator offset cancellation is used in both a single-stage preamplifier and a subsequent latch to achieve an offset of less than 300 pV at comparison rates as high as 10 MHz, with a power ...
Following a review of conventional offset cancellation techniques, circuit designs achieving 12-b resolution in both BiCMOS and CMOS 5-V technologies are presented. ...
Shott and the Stanford Integrated Circuits Laboratory staff for fabricating the BiCMOS prototype, and to National Semiconductor Corporation and L. ...
doi:10.1109/4.173122
fatcat:7oebwqefmfaezjfxuyumrhdgki
A Distributed Amplifier System for Bilayer Lipid Membrane (BLM) Arrays With Noise and Individual Offset Cancellation
2015
IEEE Transactions on Biomedical Circuits and Systems
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2015; you can also visit the original URL.
The file type is application/pdf.
Specifically, we have developed a new integrated circuit amplifier based on a novel noise cancellation scheme that eliminates flicker noise derived from devices under test and amplifiers. ...
Complex microfluidic devices are being developed but these are restricted in terms of array size and structure or have integrated electronic sensing with limited noise performance. ...
Note that this current offset could not be canceled out by CDS, which cannot discern between signal and current offset. ...
doi:10.1109/tbcas.2014.2346402
pmid:25252284
fatcat:tlue7y6rbbgcng57zfldiyjknu
Analysis of Nonideal Effects on a Tomography-Based Switched-Capacitor Transducer
2007
IEEE Sensors Journal
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The use of CDS takes advantage of the cancellation of dc offsets and 1/f noise arising from the CMOS op-amps. ...
ANALYSIS OF SC CDS ECT TRANSDUCER Although the offset and 1/f noise components of the CMOS op-amps can be canceled effectively in the design of the SC CDS ECT transducer, other second-order effects may ...
From 1989 to 1992, he was a Research Assistant with the University of Plymouth, working in the area of MOS continuous-time filters. ...
doi:10.1109/jsen.2006.890124
fatcat:fxxgh5fs6bfbpdoayrvbgth2ny
Comparison of two optimized readout chains for low light CIS
2014
Image Sensors and Imaging Systems 2014
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
Both chains contain a 4T pixel, a column amplifier and a single slope analog-to-digital converter operating a CDS. ...
We compare the noise performance of two optimized readout chains that are based on 4T pixels and featuring the same bandwidth of 265kHz (enough to read 1Megapixel with 50frame/s). ...
f c , the transfer function of the CDS circuit is given by H CDS (f ) = 4sin 2 (πT CDS f ) 1 + (f /f c ) 2 (6) Consider a noise source at the input of CDS circuit with a power spectral density S(f ) given ...
doi:10.1117/12.2036740
fatcat:fxavku5ybfdkre2bkpmtxtloqq
Column-Parallel Correlated Multiple Sampling Circuits for CMOS Image Sensors and Their Noise Reduction Effects
2010
Sensors
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2017; you can also visit the original URL.
The file type is application/pdf.
The noise reduction effects of their circuits have been investigated with a noise analysis and an implementation of a 1Mpixel pinned photodiode CMOS image sensor. ...
It has a similar effect to that of an amplified CDS for the thermal noise but is a little more effective for 1/f and RTS noises. ...
Acknowledgements This work was partially support by the Ministry of Education, Culture, Sports, Science and Technology under Grant-in-Aid for Scientific Research (A), No. 19206040, and the "Knowledge Cluster ...
doi:10.3390/s101009139
pmid:22163400
pmcid:PMC3230944
fatcat:ec4w5liwlnfc3kvwgw5jh26myy
A High-Accuracy Ultra-Low-Power Offset-Cancelation On-Off Bandgap Reference for Implantable Medical Electronics
2019
Electronics
Preserved Fulltext
A copy of this work was available on the public web and has been preserved in the Wayback Machine. The capture dates from 2020; you can also visit the original URL.
The file type is application/pdf.
Measurement results show that the circuit works properly in the supply voltage range of 1.8–3.2 V and achieves a line regulation of 0.59 mV/V. ...
The on-off bandgap combined with sample-and-hold switched-RC filter is developed to reduce power consumption and noise. ...
Conflicts of Interest: The authors declare no conflict of interest. ...
doi:10.3390/electronics8070814
fatcat:z5z3fze7hfhfbgj67vrejmlqry
« Previous
Showing results 1 — 15 out of 2,341 results