Filters








66,006 Hits in 5.9 sec

Mechanisms for collaboration

Nicola Yuill, Yvonne Rogers
2012 ACM Transactions on Computer-Human Interaction  
to consider when designing and analysing multi-user interfaces for collaboration.  ...  We use this framework of mechanisms and constraints to explain the successes and failures of existing designs, then apply it to three case studies of design, and finally derive from them a set of questions  ...  The work for this paper was supported by a grant from the Engineering and Physical Sciences Research Council for the ShareIT project (EP/F017324/1).  ... 
doi:10.1145/2147783.2147784 fatcat:t6nbpxqfrrccrghygxuot5e6ai

Middleware mechanisms for interaction interoperability in Collaborative Virtual Environments

Mario Ciampi, Luigi Gallo, Antonio Coronato, Giuseppe De Pietro
2010 International Journal of Advanced Media and Communication  
user interfaces.  ...  In this paper, we discuss interaction interoperability in Collaborative Virtual Environments (CVE), intended to mean the ability of two or more users to cooperate despite the heterogeneity of their interfaces  ...  ACKNOWLEDGMENT This work has been partly supported by the project "MIPHA -A Middleware for Pervasive Healthcare Applications" within the "POR -Misura 3.17" funded by the "Regione Campania".  ... 
doi:10.1504/ijamc.2010.032141 fatcat:2wjlbsiswbcmpaniexjhjahl7e

State Transmission Mechanisms for a Collaborative Virtual Environment Middleware Platform [chapter]

João Orvalho, Pedro Ferreira, Fernando Boavida
2001 Lecture Notes in Computer Science  
Collaborative virtual environments (CVE) require the use of specially designed mechanisms that allow for a consistent sharing of state among involved users.  ...  These mechanisms must, somehow, compensate for network latency and losses in such a way that all players have a single, coherent perception of the system state.  ...  Acknowledgement This work was partially financed by the Portuguese Foundation for Science and Technology, FCT.  ... 
doi:10.1007/3-540-44763-6_15 fatcat:weku5m3qdnbslhhel4ds4smrq4

Incremental simulation modelling for Internet collaborative design

S. F. Qin, D. K. Wright
2004 Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture  
In order to support Web-based collaborative design in terms of transferring or updating models dynamically and efficiently, new incremental modelling and local updating strategies have been developed for  ...  An assembly connection is defined as a group of assembly constraints and it makes assembly easier. A case study example is given to show the content of the proposed research.  ...  A multi-user CAD prototype system Co-CAD [8] has been developed. The Co-CAD was largely from a mechanical engineer's perspective and limited to collaboration between two 4 people.  ... 
doi:10.1243/0954405041486127 fatcat:mct34zsoajhq7ie2evu5cad6hq

Supporting A Flexible Grouping Mechanism for Collaborating Engineering Teams

Georgios Kanakis, Stefan Fischer, Djamel Eddine Khelladi, Alexander Egyed
2019 2019 ACM/IEEE 14th International Conference on Global Software Engineering (ICGSE)  
The goal of our evaluation was to provide the evidence for the scalability of our approach. For the awareness among collaborating parties, we have built a graphical user interface.  ...  [20] presented a user evaluation of collaborative tools for software engineering. They used a post experiment questionnaire to evaluate the experiments qualitative aspects.  ... 
doi:10.1109/icgse.2019.00033 dblp:conf/icgse/Kanakis0KE19 fatcat:ah33ztaeibg5haq7fhu6lm7ofm

Cloud-Edge Collaboration-Based Knowledge Sharing Mechanism for Manufacturing Resources

Xixiang Wang, Jiafu Wan
2021 Applied Sciences  
This paper proposes a mechanism for knowledge sharing between manufacturing resources that is based on cloud-edge collaboration.  ...  The proposed method's effectiveness was verified through a comparative experiment contrasting manual configuration and knowledge sharing configuration on a multi-variety, small-batch manufacturing experiment  ...  Acknowledgments: The authors thank Guangdong Provincial Key Laboratory of Technique and Equipment for Macromolecular Advanced Manufacturing.  ... 
doi:10.3390/app11073188 fatcat:3ggntaw3erewvddo67jj3s7op4

Collaborative Research for Future Space Transportation Systems [chapter]

Oskar J. Haidn, Nikolaus A. Adams, Rolf Radespiel, Thomas Sattelmayer, Wolfgang Schröder, Christian Stemmer, Bernhard Weigand
2020 Notes on Numerical Fluid Mechanics and Multidisciplinary Design  
The main emphasis of the focal area thrust-chamber assembly was combustion and heat transfer investigated in various model combustors, on dual-bell nozzle phenomena and on the definition and design of  ...  This chapter book summarizes the major achievements of the five topical focus areas, Structural Cooling, Aft-Body Flows, Combustion Chamber, Thrust Nozzle, and Thrust-Chamber Assembly of the Collaborative  ...  For the mechanical structural computation, a thermodynamic consistent elasto-viscoplastic material model with thermal expansion for large deformations was developed and implemented into a user material  ... 
doi:10.1007/978-3-030-53847-7_1 fatcat:p2ytqzkxbnhqbcouqirq7yogf4

Dependency Graph Based on User Taxonomy and Related Parameters for more Efficient Collaborative Work

Franca Alexandra Rupprecht, François M. Torner, Jörg Seewig, Achim Ebert
2017 Applied Mechanics and Materials  
Such a taxonomy cannot be found in the literature, but is important for the design and development of software products under the rules of user centered design [2].  ...  Based on a case study, the findings of this work are embedded and combined in an interactive and intuitive user interface that facilitates planners to recognize and explore complex multi-dimensional networks  ...  Acknowledgements This research was funded by the German research foundation (DFG) within the IRTG 2057 "Physical Modeling for Virtual Manufacturing Systems and Processes."  ... 
doi:10.4028/www.scientific.net/amm.869.195 fatcat:l2q7zcj4ijcv7c23bgdx5ep5nm

Standardized data formats for flexible human-robot-collaboration at a multi-workstation assembly table

Daniel Brand, Niels Benthin, Marvin Bohl
2019 Journal of Mechanical and Energy Engineering  
Aspects like ergonomics and safety are considered in the design. Additionally, a standardized data format that enables users and developers to control the robot through peripheral devices is created.  ...  As an example, gesture and voice control are discussed and evaluated.  ...  Felix Riedel who was a great support for this  ... 
doi:10.30464/jmee.2019.3.3.199 fatcat:mpjn7cfi2ffvpkepxa5tibd3n4

Integration of collaboration and interaction analysis mechanisms in a concern-based architecture for groupware systems

Rafael Duque, María Luisa Rodríguez, María Visitación Hurtado, Crescencio Bravo, Carlos Rodríguez-Domínguez
2012 Science of Computer Programming  
Collaboration and interaction analysis allows for the characterization and study of the collaborative work performed by the users of a groupware system.  ...  Therefore, automating collaboration and interaction analysis enables users' work to be assessed and groupware system support and behavior to be improved.  ...  Acknowledgements This research has been partially supported by R + D projects of the Spanish MCYT under projects TIN2007-60199 and TIN2008-05995/TSI.  ... 
doi:10.1016/j.scico.2010.05.003 fatcat:rtu22iifdbcltmbdb7zz4dhgeu

A Novel Protocol Design and Collaborative Forensics Mechanism for VoIP Services

Hsien-Ming Hsu, Feng-Yu Lin, Yeali Sunny Sun, Meng Chang Chen
2012 Journal of Communications  
We present a procedure for collaborative forensics and discuss the details of protocol design.  ...  Currently, VoIP researchers have only proposed a framework for this type of partnership, and have yet to provide a common protocol for forensic Internet collaboration.  ...  In SKYEYE [11] , Hsu et al. propose a collaborative forensics framework to identify caller for VoIP services in multi-network environments.  ... 
doi:10.4304/jcm.7.2.132-142 fatcat:w64db2ch5jbhdnoh3w54osaaua

A Comprehensive Optimum Design Method of Monitorability-based Design for Mechanical System Using Collaborative Theory

Sheng Chenxing, Zhang Yuelei, Yan Xinping, Liu Jie
2013 Research Journal of Applied Sciences Engineering and Technology  
The experiments demonstrate the effectiveness of the proposed monitorability design system for a more powerful optimum design of mechanical systems and show a promising future for the industrial applications  ...  In this study, a novel method based on collaborative theory is proposed for the monitorability design.  ...  Design development of mechanical products Implementation of monitorability-based design can provide data support for improvement design and performance quality evaluation of mechanical system products.  ... 
doi:10.19026/rjaset.6.3685 fatcat:dc7gzp6mafaslbqiwfiho6iwoa

Methods and Technologies for Research- and Metadata Management in Collaborative Experimental Research

Nils Preuss, Georg Staudter, Moritz Weber, Reiner Anderl, Peter F. Pelz
2018 Applied Mechanics and Materials  
This article introduces a concept for a software independent solution for managing data in collaborative research environments.  ...  The article presents a prototype implementation of the proposed approach and discusses its application on the demonstrator test rig of a collaborative research centre in the field of mechanical engineering  ...  Acknowledgements The authors would like to thank the German Research Foundation (DFG) for funding this research within the Collaborative Research Centre (SFB) 805 'Control of uncertainty in load carrying  ... 
doi:10.4028/www.scientific.net/amm.885.170 fatcat:ljgpv47btne5fknlbekthf2yiq

Evaluation for collaborative systems

Laurie Damianos, Lynette Hirschman, Robyn Kozierok, Jeffrey Kurtz, Andrew Greenberg, Kimberley Walls, Sharon Laskowski, Jean Scholtz
1999 ACM Computing Surveys  
The Evaluation Working Group (EWG) in the Defense Advanced Research Projects Agency (DARPA) Intelligent Collaboration and Visualization (IC&V) program has developed a methodology for evaluating collaborative  ...  This methodology consists of a framework for classification of CSCW (Computer Supported Cooperative Work) systems, metrics and measures related to the various components in the framework, and a scenario-based  ...  Contributions to this work by NIMA and NIST were funded, in part, through the DARPA IC&V Program.  ... 
doi:10.1145/323216.323362 fatcat:yq7yd6cgzjbope2y2emr6lfqf4

IN2CO - A Visualization Framework for Intuitive Collaboration [article]

Franca-Alexandra Rupprecht, Bernd Hamann, Christian Weidig, Jan C. Aurich, Achim Ebert
2016 EuroVis 2016 - Short Papers  
We introduce Intuitive Collaboration (IN2CO), a scalable visualization framework that supports decision-making processes concerning multilevels and multi-roles.  ...  Today, the need for interaction and visualization techniques to fulfill user requirements for collaborative work is ever increasing.  ...  We thank to Louise Kellogg and Oliver Kreylos (W.M. Keck Center for Active Visualization in the Earth Sciences, UC Davis) for collaborating with us.  ... 
doi:10.2312/eurovisshort.20161174 dblp:conf/vissym/RupprechtHWAE16 fatcat:6imqgwsdjzgj3nvhsk4qvln67e
« Previous Showing results 1 — 15 out of 66,006 results