963 Hits in 13.5 sec

Table of contents

2019 IEEE Transactions on Circuits and Systems Part 1: Regular Papers  
Huemer 3517 Maximizing the Data Rate of an Inductively Coupled Chip-to-Chip Link by Resetting the Channel State Variables ................. ............................................................  ...  Goes 3544 Analytical Equivalent Circuit Extraction Procedure for Broadband Scalable Modeling of Three-Port Center-Tapped Symmetric On-Chip Inductors ....................................................  ... 
doi:10.1109/tcsi.2019.2935917 fatcat:sigryh2cmfd2th2cjxoy6kj3pu

Serial Storage Architecture

I. D. Judd, P. J. Murfet, M. J. Palmer
1996 IBM Journal of Research and Development  
An overview is given of the architecture itself, followed by a general description of the hardware implementation of a dual-port SSA node on a single chip. IBM  ...  This paper describes Serial Storage Architecture (SSA), a definition and general specification of a high-performance serial link for the attachment of input/output devices.  ...  Acknowledgment The authors would like to acknowledge the work of many colleagues in IBM and other companies who have contributed to the definition and implementation of SSA.  ... 
doi:10.1147/rd.406.0591 fatcat:hu46v5fk7nep3lhc6jp6bngj74

A Partial-Current-Steering Biphasic Stimulation Driver for Vestibular Prostheses

Timothy G. Constandinou, Julius Georgiou, Christofer Toumazou
2008 IEEE Transactions on Biomedical Circuits and Systems  
The circuit has been designed to be digitally programmable as part of an implantable vestibular prosthesis. The hardware has been implemented in AMS 0.35 m 2P4M CMOS technology.  ...  In this fashion, power is conserved while still gaining from the benefits of current steering.  ...  Typically, medical implants use inductive schemes whereby patient settings data is encoded onto a carrier signal that is inductively coupled through the skin, to the subcutaneously implanted device where  ... 
doi:10.1109/tbcas.2008.927238 pmid:23852757 fatcat:wv3hpntu2fdn7ahhben3opwk74

Microelectronics of Recording, Stimulation, and Wireless Telemetry for Neuroprosthetics: Design and Optimization [chapter]

Moo Sung Chae, Zhi Yang, Wentai Liu
2009 Implantable Neural Prostheses 2  
Several state of art systems such as integrated wireless neural recording systems and retinal prostheses are presented to explain how the fundamental knowledge and principles are used in the real applications  ...  The interdisciplinary nature of the system requires a wide range of knowledge on both biology and electronics to build such systems.  ...  Acknowledgement The authors greatly thank Hyunchul Kim  ... 
doi:10.1007/978-0-387-98120-8_9 fatcat:qtk3m2kt3fdj5mdusgf5p5brky

Prototype system for superconducting quantum interference device multiplexing of large-format transition-edge sensor arrays

Carl D. Reintsema, Jörn Beyer, Sae Woo Nam, Steve Deiker, Gene C. Hilton, Kent Irwin, John Martinis, Joel Ullom, Leila R. Vale, Mike MacIntosh
2003 Review of Scientific Instruments  
We present data verifying performance of the digital-feedback system.  ...  We cover the design and integration of cryogenic SQUID multiplexers and amplifiers, signal management and wiring, analog interface electronics, a digital feedback system, serial-data streaming and management  ...  The line-sampling frequency could be further increased by modifying the hardware to increase the clock rate of the master timing chip, or by running the fiberoptic data link on a faster clock.  ... 
doi:10.1063/1.1605259 fatcat:seor2zvxcjh27byalsvrddufru

The ATLAS TRT electronics

The ATLAS TRT collaboration, E Abat, T N Addy, T P A Åkesson, J Alison, F Anghinolfi, E Arik, M Arik, G Atoian, B Auerbach, O K Baker, E Banas (+200 others)
2008 Journal of Instrumentation  
This paper describes the on and off detector electronics for the TRT as well as the TRT portion of the data acquisition (DAQ) system.  ...  The ATLAS inner detector consists of three sub-systems: the pixel detector spanning the radius range 4cm-20cm, the semiconductor tracker at radii from 30 to 52 cm, and the transition radiation tracker  ...  Acknowledgments The research described in this publication was partly supported by following funding agencies: the European Union (DGXII), the International Science Foundation, the Swedish Research Council  ... 
doi:10.1088/1748-0221/3/06/p06007 fatcat:qditm7sg45ckbnz5v2impzhrqq

Near-Field Communication in Biomedical Applications

Sung-Gu Kang, Min-Su Song, Joon-Woo Kim, Jung Woo Lee, Jeonghyun Kim
2021 Sensors  
This paper focuses on biomedical applications among the diverse applications of NFC.  ...  It addresses the benefits of combining traditional and new sensors (temperature, pressure, electrophysiology, blood flow, sweat, etc.) with NFC technology.  ...  Conflicts of Interest: The authors declare no conflict of interest.  ... 
doi:10.3390/s21030703 pmid:33498589 pmcid:PMC7864326 fatcat:gn6gpluakbguflvomfle4zljuu

Technical design of the phase I Mu3e experiment

K. Arndt, H. Augustin, P. Baesso, N. Berger, F. Berg, C. Betancourt, D. Bortoletto, A. Bravar, K. Briggl, D. vom Bruch, A. Buonaura, F. Cadoux (+94 others)
2021 Nuclear instruments & methods in physics research / A 1014  
The high rate of up to 108 muon decays per second and the low momenta of the decay electrons and positrons pose a unique set of challenges, which we tackle using an ultra thin tracking detector based on  ...  A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of 2⋅10$^{−15}$.  ...  We gratefully acknowledge important contributions to the experiment, made by staff in the mechanical and electrical workshops and cleanroom facilities in all collaborating institutes. G.  ... 
doi:10.3204/pubdb-2022-00370 fatcat:b3cwkavgyndzlbqrobnn6dykwa

On-Chip Surfing Interconnect [chapter]

Suwen Yang, Mark Greenstreet
2012 Advanced Circuits for Emerging Technologies  
Bandwidth is also important for on-chip interconnect and is limited by skew and jitter.  ...  This buffer uses inverters with variable output strength to implement a simple, lowgain DLL.  ...  I used wide wires to maximize the design margins and thus to maximize the likelihood of the chip working on the first try. The line parameters are summarized in Table 5 .2.  ... 
doi:10.1002/9781118181508.ch16 fatcat:n2ijhbjlrbe63bi6vhbrwexa3a

A 3.9 mW 25-Electrode Reconfigured Sensor for Wearable Cardiac Monitoring System

Long Yan, Joonsung Bae, Seulki Lee, Taehwan Roh, Kiseok Song, Hoi-Jun Yoo
2011 IEEE Journal of Solid-State Circuits  
A cm-range 13.56 MHz fabric inductor coupling is adopted to start/stop the SoC remotely.  ...  With 25 adhesive screen-printed fabric electrodes, detection of TIV and ECG at 16 different sites of the heart is possible, allowing optimal detection sites to be configured to accommodate different user  ...  ACKNOWLEDGMENT The authors would like to thank Prof. J. Yoo, Dr. N. Cho, and Dr. H. Kim, for their helpful comments and technical supports.  ... 
doi:10.1109/jssc.2010.2074350 fatcat:jmtvt6tyozbn7e3h2vpdmqfgna

Analog Switches and Multiplexers [chapter]

Walt Kester
2005 Data Conversion Handbook  
We believe that customers now perceive that they have sufficient backlog orders placed on Maxim to support their current consumption rates.  ...  Research and development expense increased by $1.7 million, to 12.9% of net revenues.  ...  Acknowledgment: The authors wish to thank Larry Blue, Tom Jackson, and Steve Rosenbaum from Hughes Network Systems and Will Grimes from Maxim Integrated Products for their help in the development of the  ... 
doi:10.1016/b978-075067841-4/50030-0 fatcat:fqzt3xz2jnhbhmlneufjwwi2u4

Superconducting Qubits: A Short Review [article]

M. H. Devoret, A. Wallraff, J. M. Martinis
2004 arXiv   pre-print
We discuss in this review how qubit decoherence is affected by the intrinsic noise of the junction and what can be done to improve it.  ...  In contrast to microscopic entities such as spins or atoms, they tend to be well coupled to other circuits, which make them appealling from the point of view of readout and gate implementation.  ...  Acknowlegements The authors have greatly benefited from discussions with I. Chuang  ... 
arXiv:cond-mat/0411174v1 fatcat:m66vywdtl5gnde7v3cgo3f4bhy

Design and Implementation of a Polar Wind and Solar Hybrid Power Supply Controller

Yan Chen, Chunyan Ma, Xiangnan Hou, Yinke Dou, Rui Chen
2019 Applied Sciences  
and complementary, this paper proposes to adapt to the power supply problem of the aeroponic, stereoscopic cultivation device in the Controlled Micro-environment applied to the polar regions.  ...  Based on the STC8A8K64S4A12 single-chip microcomputer, the hardware circuit and software program of the wind and solar hybrid power supply system controller are also designed.  ...  Conflicts of Interest: The authors declare no conflict of interest.  ... 
doi:10.3390/app9193953 fatcat:aunmsguqz5hy5klistgkpj457a

A Minimally Invasive 64-Channel Wireless μECoG Implant

Rikky Muller, Hanh-Phuc Le, Wen Li, Peter Ledochowitsch, Simone Gambini, Toni Bjorninen, Aaron Koralek, Jose M. Carmena, Michel M. Maharbiz, Elad Alon, Jan M. Rabaey
2015 IEEE Journal of Solid-State Circuits  
The device is comprised of a highly flexible, high-density, polymer-based 64-channel electrode array and a flexible antenna, bonded to 2.4 mm × 2.4 mm CMOS integrated circuit (IC) that performs 64-channel  ...  A dual-mode power-receiving rectifier reduces data-dependent supply ripple, enabling the integration of small decoupling capacitors on chip and eliminating the need for external components.  ...  ACKNOWLEDGMENT The authors would like to thank ST Microelectronics for IC fabrication, BDA for Analog FastSpice, the MuSyC Center for research support, and the sponsors, staff, and students of the Berkeley  ... 
doi:10.1109/jssc.2014.2364824 fatcat:5y2uo3sdw5ahzjfqgzscb4yacy

A 22-Gb/s Time-Interleaved Low-Power Optical Receiver With a Two-Bit Integrating Front End

Bahaa Radi, Mohammadreza Sanadgol Nezami, Mohammad Taherzadeh-Sani, Frederic Nabki, Michael Menard, Odile Liboiron-Ladouceur
2020 IEEE Journal of Solid-State Circuits  
The inputs to two of the four sub receivers are optically delayed by one bit and two complementary quarter-rate clock phases are used to completely recover the data.  ...  the operating data rate.  ...  The layout of the proposed structure is shown in Fig. 11 . The proposed SiP chip consists of a single-input grating coupler used to couple the light to the chip, followed by a 50:50 splitter.  ... 
doi:10.1109/jssc.2020.3025051 fatcat:4sqj4bw4kzaybnvpuh6bhvqhfm
« Previous Showing results 1 — 15 out of 963 results