Filters








4,894 Hits in 5.1 sec

Improved RFID Middleware Architecture and Optimal Algorithm Based on Internet of Things

Weiqing Qu, Yuedou Qi, Qi Zhang, Chunliang Zhou
2016 International Journal of Future Generation Communication and Networking  
Through the analysis of RFID middleware technology, we put forward an optimized load balancing algorithm.  ...  The results show that the optimization algorithm is superior to the existing algorithms in the average time of load balancing and label processing. 264 Copyright ⓒ 2016 SERSC computing technology [9] .  ...  Analysis of RFID Middleware System Load Balancing Mechanism of RFID System RFID middleware system has two kinds of data communication format calculation: cloud computing and grid computing.  ... 
doi:10.14257/ijfgcn.2016.9.11.24 fatcat:lae4nkt2wva4dadpvqcb3fcrsy

Load Balancing in Large-Scale RFID Systems

Q. Dong, A. Shukla, V. Shrivastava, D. Agrawal, S. Banerjee, K. Kar
2007 IEEE INFOCOM 2007 - 26th IEEE International Conference on Computer Communications  
Our results demonstrate that our schemes achieve very good performance even in highly dynamic large-scale RFID systems.  ...  In this paper we, therefore, address this load balancing problem for readers -given a set of tags that are within range of each reader, which of these tags should each reader be responsible for such that  ...  Therefore, designing efficient distributed load balancing schemes becomes a critical issue in the implementation of large-scale RFID systems.  ... 
doi:10.1109/infcom.2007.265 dblp:conf/infocom/DongSSABK07 fatcat:v4p4d3u7dbffvewvobmapni7cy

Load balancing in large-scale RFID systems

Qunfeng Dong, Ashutosh Shukla, Vivek Shrivastava, Dheeraj Agrawal, Suman Banerjee, Koushik Kar
2008 Computer Networks  
Our results demonstrate that our schemes achieve very good performance even in highly dynamic large-scale RFID systems.  ...  In this paper we, therefore, address this load balancing problem for readers -given a set of tags that are within range of each reader, which of these tags should each reader be responsible for such that  ...  Therefore, designing efficient distributed load balancing schemes becomes a critical issue in the implementation of large-scale RFID systems.  ... 
doi:10.1016/j.comnet.2008.03.003 fatcat:6mxvaeu27nc6pfonnwfu2u7nqm

An Approach to Design and Implement RFID Middleware System over Cloud Computing

Wenhong Tian, Ruini Xue, Xu Dong, Haoyan Wang
2013 International Journal of Distributed Sensor Networks  
Large-scale application of RFID networks requires that RFID middleware system can process a large amount of data efficiently, with load-balancing, efficient redundant data elimination, and Web service  ...  ARMMS has different focuses than existing RFID middleware in distributed design, data filtering, integrated load balance, and Web service APIs and designs all these over Cloud.  ...  Reference [29] introduces a distributed and agent-based design of load balance system for RFID middleware, which applies mobile and stationary agents to gather information and execute load balancing.  ... 
doi:10.1155/2013/980962 fatcat:u5zzdnuyi5gdpf2vi26ehbrvgi

Autonomic Management of Scalable Load-Balancing for Ubiquitous Networks [chapter]

Toshio Tonouchi, Yasuyuki Beppu
2006 Lecture Notes in Computer Science  
This system, however, is prone to diverge; the system continues load balancing repeatedly in certain configuration and never stops load-balancing operations.  ...  This report proposes the scalable load-balancing method in which servers communicate each other, and they manage themselves for load-balancing.  ...  Acknowledgement This research was sponsored by the Ministry of internal Affairs and Communication in Japan.  ... 
doi:10.1007/11876601_4 fatcat:jlyf3oidhfhblijwbqpzjatopm

A SELF-ADAPTIVE DATA BALANCE PROTOCOL FOR DISTRIBUTED RADIO FREQUENCY IDENTIFICATION SENSOR NETWORK

Charles Z. Liew, Raymond P. Shaw, Ting-Ting Zhang
2014 International Journal on Smart Sensing and Intelligent Systems  
The test results show that the system with proposed approach provides an efficient and more balanced in data distribution which proves the protocol is feasible for the application scenario.  ...  We analyzed data pitfall in distributed RFID-sensor network, revealing the reason lies in the phenomenon. A distributed solution to tackle the problem has been designed in a simple way.  ...  Compared with the result of MB-EPS, the overall data distribution (which refers to the total data quantity of in MBS) and local data load (which refers to the data load received by each node) are balanced  ... 
doi:10.21307/ijssis-2017-719 fatcat:pnfr6hckinftdbue6kejautbr4

Effective Load Balancing with Power Conservation in RFID

Vijayakumar. G.Dhas, Ramanathan Muthukaruppan, Konguvel Balakrishnan, Rajarajan Ganesan
2010 International Journal of UbiComp  
For the effectiveness of the RFID system several algorithms like Load Balancing algorithm and Redundant Reader Elimination algorithm were proposed.  ...  The system effectiveness can be improved by balancing the load among the readers and turning off readers that do not monitor tags in order to reduce power consumption.  ...  In the Load balancing scheme in large-scale RFID systems proposed by Q.Dong et. al [3] , the tags are allocated to the readers in a fair manner such that no reader in the entire system is allocated to  ... 
doi:10.5121/iju.2010.1402 fatcat:p347ecpxwva7xond5j4kr27wpq

Protocols and Architectures for Next-Generation Wireless Sensor Networks

Sana Ullah, Joel J. P. C. Rodrigues, Farrukh Aslam Khan, Christos Verikoukis, Zuqing Zhu
2014 International Journal of Distributed Sensor Networks  
The paper entitled "A QoS Model for a RFID Enabled Application with Next-Generation Sensors for Manufacturing Systems" proposes a quality model for RFID systems.  ...  When the manufacturing system addresses these criteria and satisfies users and developers, RFID system benefits can be obtained.  ...  The paper entitled "A QoS Model for a RFID Enabled Application with Next-Generation Sensors for Manufacturing Systems" proposes a quality model for RFID systems.  ... 
doi:10.1155/2014/705470 fatcat:hubqlswtyrhmpambbjmbrdzlji

Demonstrating an evacuation algorithm with mobile devices using an e-scavenger hunt game

Jesse Szwedko, Callen Shaw, Alexander G. Connor, Alexandros Labrinidis, Panos K. Chrysanthis
2009 Proceedings of the Eighth ACM International Workshop on Data Engineering for Wireless and Mobile Access - MobiDE '09  
a building visiting different locations in a load balancing manner.  ...  The proposed system integrates QR Code and RFID-based positioning with a routing system with mounted terminals and displays for guiding people with RFID tags out of a building.  ...  The application will route users from location to location according to the load balancing algorithm described below in Section 3 to demonstrate both RFID and QR frontends for the system.  ... 
doi:10.1145/1594139.1594154 dblp:conf/mobide/SzwedkoSCLC09 fatcat:gyfz644txvbo5mpdlwrl7ysrsa

Coverage-Based Placement in RFID Networks: An Overview

Ashraf E. Al-Fagih, Fadi M. Al-Turjman, Hossam S. Hassanein, Waleed M. Alsalih
2012 2012 Third FTRA International Conference on Mobile, Ubiquitous, and Intelligent Computing  
We finally discuss some open issues regarding RFID placement in terms of alternative objectives and systems' specifications.  ...  The placement problem, i.e. choosing the optimal locations for RFID readers, tags or both in a given RFID layout, is reviewed in this paper.  ...  This may shift the attention to optimization goals other than coverage, such as cost, tag reading time, load balancing and tag localization, among others.  ... 
doi:10.1109/music.2012.45 dblp:conf/music/Al-FagihAHA12 fatcat:3iuyv2ecrrabrojzfwa32dfpxu

Providing a new approach to improve in speed and longevity of the Internet of Things based on RFID

Arman Kavoosi Ghafi, Behnaz Farzi, Helena Kojooyan Jafari
2017 International Journal of Computer Applications Technology and Research  
RFID technology can be an alternative for the barcodes. In fact, RFID is more than just a bar code, because it has an automatic system scanner. This two technologies have major differences.  ...  Simulation results show that the algorithm MOPSO compared to the optimization algorithms coverage, signal interference and load balancing has been effective.  ...  If load balancing is the only goal of system optimization, this solution will have the best impacts and results. But, because there are a lot of variables that are fine.  ... 
doi:10.7753/ijcatr0602.1001 fatcat:pycybrwka5ccph5c3yfvzdplde

Load shedding based resource management techniques for RFID data

N. Ahmed, U. Ramachandran
2009 2009 IEEE International Conference on RFID  
The built-in redundancy in the RF 2 ID system allows the VRs to shed load with reasonable system performance thus enhancing the overall reliability of the deployment.  ...  RFID based systems are enjoying widespread adoption in a variety of application scenarios. Item tracking in a supply chain environment is one such application.  ...  Load balancing and Streaming Application There is a significant amount of work on load balancing in distributed systems where the aim is to distribute the load evenly using techniques such as load migration  ... 
doi:10.1109/rfid.2009.4911168 fatcat:otckrs4jzrhbjnzdzs6g5wcoia

RFID Networks Planning Using BF-PSO [chapter]

Qiwei Gu, Kai Yin, Ben Niu, Hanning Chen
2012 Lecture Notes in Computer Science  
In this paper, we develop a new mathematical model for planning RFID networks with multiple objectives, including carbon emissions, economic efficiency, load balance, interference between readers and coverage  ...  RFID network planning (RNP) problem is a core challenge in the widespread application of RFID networks.  ...  Load balance is an effective way of planning.  ... 
doi:10.1007/978-3-642-31576-3_24 fatcat:wyhszxit4rglxhb444suxt4jxa

RF2ID: A Reliable Middleware Framework for RFID Deployment

Nova Ahmed, Rajnish Kumar, Robert Steven French, Umakishore Ramachandran
2007 2007 IEEE International Parallel and Distributed Processing Symposium  
This paper investigates system software solutions for achieving a highly reliable deployment that mitigates inherent unreliability in RFID technology.  ...  Abstract1 The reliability of RFID systems depends on a number of factors including: RF interference, deployment environment, configuration of the readers, and placement of readers and tags.  ...  The equipment used in the experimental studies is funded in part by an NSF Research Infrastructure award EIA-99-72872, and Intel Corp.  ... 
doi:10.1109/ipdps.2007.370256 dblp:conf/ipps/AhmedKFR07 fatcat:7gb3njwz2ncazkqetnwbktlszq

RFID-assisted indoor localization and the impact of interference on its performance

Apostolia Papapostolou, Hakima Chaouchi
2011 Journal of Network and Computer Applications  
Numerical results validate the potential of RFID in location sensing but also the requirement for careful design of RFID-based positioning systems.  ...  Even though object identification is its primary objective, it is generally accepted that RFID systems can revolutionize various commercial applications.  ...  Numerical results validate the potential of RFID in location sensing but also the requirement for careful design of RFID-based positioning systems. & 2010 Elsevier Ltd. All rights reserved.  ... 
doi:10.1016/j.jnca.2010.04.009 fatcat:7qtsu2l47jcxjeh2itdrvqknum
« Previous Showing results 1 — 15 out of 4,894 results