Filters








4,966 Hits in 4.6 sec

INTELLIGENT SCADA FOR LOAD CONTROL

S. R. KATKAR, S. V. UMREDKAR
2013 International Journal of Power System Operation and Energy Management  
Feature of the design intends load control, distribution and history readings. A small hardware model shows the conveyer application which interface with SCADA and PLC.  ...  This paper presents the use of intelligent system with Supervisory control and data acquisition system (SCADA) Software and hardware components platform like PLC considered as the main contents of this  ...  The application described in this paper is a Smart Home tool that controls an industrial conveyor, using an intelligent individual SCADA system to control power equipments.  ... 
doi:10.47893/ijpsoem.2013.1081 fatcat:dezyujpbebfw5k2pc2nw2mrc5u

INTELLIGENT LOAD CONTROL SYSTEM FOR 10 \ 0.4 KV TRANSFORMERS USING SCADA

Andriy Vidmysh, Oleksii Tokarchuk, Michael Karpiychuk, Maksym Paladii
2020 ENGINEERING, ENERGY, TRANSPORT AIC  
SCADA data - load levels, temperature levels and voltages - are fed through a series of digital communication channels to the master controller for immediate action.  ...  Therefore, during the surges of consumer loads, constant supply is ensured without damaging the transformers. The distribution system is also open for diagnostic control.  ...  INTELLIGENT LOAD CONTROL SYSTEM FOR 10 \ 0.4 KV TRANSFORMERS USING SCADA The article proposes a system of control of load of the power transformer on the basis of monitoring of the basic operating parameters  ... 
doi:10.37128/2520-6168-2020-1-17 fatcat:paqofw4scbdtzcwuposw35b5zm

Smart Grid applications with IEC 61499 reference architecture

Gulnara Zhabelova, Sandeep Patil, Chen-wei Yang, Valeriy Vyatkin
2013 2013 11th IEEE International Conference on Industrial Informatics (INDIN)  
This paper presents implementation of the Distributed Grid Intelligence (DGI) applications such as Intelligent Fault Management and Load Balancing using IEC61499 reference architecture.  ...  Both applications were verified using co-simulation approach: control and power system simulated on PCs, and power system simulation on a PC networked with the number of distributed hardware running control  ...  Load Balancing Application Another DGI application critical for FREEDM operation is Load Balancing.  ... 
doi:10.1109/indin.2013.6622928 dblp:conf/indin/ZhabelovaPYV13 fatcat:ay6opf2cd5btzkqpjvt2irwltq

Research and Application of a SCADA System for a Microgrid

Shuangshuang Li, Baochen Jiang, Xiaoli Wang, Lubei Dong
2017 Technologies  
For the sake of security and stability of the microgrid, the SCADA system realizes business processing on real-time data acquisition and storage, load balancing and resource recovery, concurrent security  ...  In this research, the lower central controller and upper WEB (World Wide Web) monitoring system are connected by the SCADA system, which is the hub of a microgrid intelligent monitoring platform.  ...  In a microgrid, a Supervisory Control and Data Acquisition (SCADA) [3] system is used for data acquisition, monitoring and procedure control for spot devices, and is a computer based production procedure  ... 
doi:10.3390/technologies5020012 fatcat:s7ldlo66xvcrvoodpflsnaohea

Application of Edge Computing and SCADA System in Second Class Substation

Zhenyu Gao, Pan Chen, Zhonghua Chen, Guochao Shi, Zhoncai Liu, Shiwei Feng, R. Weerasinghe, C. Fang
2021 E3S Web of Conferences  
intelligent SCADA system on 750 kV substation briefly, the architecture will eventually margin calculation and combination of SCADA system, discuss the practicability of EC SCADA system.  ...  of edge calculation and the combination of the substation, this paper makes a brief introduction to the calculation of edge, and describes its development situation at home and abroad, and then stand for  ...  SCADA System Architecture Model in 750 kV Intelligent Substation For example, 750kV intelligent substation, SCADA system uses "Three-tier two-network [5] " hierarchical distributed architecture with  ... 
doi:10.1051/e3sconf/202123702005 fatcat:h5xohe5wajb3jbmcrg3abqmnwu

Effect of SCADA Implementation to Productivity in Ammunition Industry: A Review

Yudistira Sanjiwani, Victor Yuardi Risonata, Ilham Afif, Salim Subarkah
2020 International Journal of Mechanical Engineering Technologies and Applications  
Supervisory control and data acquisition (SCADA), one of the newest method for production control, has been developed for several years. The exact form of implementation is however yet fixed.  ...  It has to be specifically developed for each industry, i.e. the ammunition industry in this case.  ...  Today SCADA is a system for measuring, data collection, monitoring, and control of industrial systems [10] .  ... 
doi:10.21776/mechta.2020.001.02.01 fatcat:44g4d5hx7bbbpi5tbrixc43dn4

SDN in SCADA Based System for Power Utilities: A Case Study of Himachal Pradesh State Electricity Board Limited SCADA System

Abhinav Sharma, Manu Sood, S. K. Sharma
2016 Indian Journal of Science and Technology  
Objectives: Supervisory Control And Data Acquisition (SCADA) systems are used to manage and monitor the flow of powers through transmission lines, substation and control points.  ...  Most of the programming languages for SDN use programming approach of standard computer language Python, thereby also making it easier for general programmers to make changes in the computer network as  ...  intelligence into today's networks.  ... 
doi:10.17485/ijst/2016/v9i32/100220 fatcat:fddbhuxl5felvhtpmsszf52oau

Intelligent Decision-Making System with Green Pervasive Computing for Renewable Energy Business in Electricity Markets on Smart Grid

Dong-Joo Kang, JongHyuk Park, Sang-Soo Yeo
2009 EURASIP Journal on Wireless Communications and Networking  
This paper is about the intelligent decision-making system for the smart grid based electricity market which requires distributed decision making on the competitive environments composed of many players  ...  Historical data acquired from SCADA system are used for load forecast. SCADA system retrieves data from the RTU installed in each substation.  ...  it is currently confined to the SCADA system that monitors and controls the power system.  ... 
doi:10.1155/2009/247483 fatcat:osk7v3o5d5h23pfm4bfj6dhi4i

Analysis of Cyber Attacks Vulnerabilities In Electrical Power Systems

2019 VOLUME-8 ISSUE-10, AUGUST 2019, REGULAR ISSUE  
The term "Smart grid" is used for the modernized electrical power system grids. Power grids as we know it is a collection of generation units and load centers that are connected through power lines.  ...  Smart grids are a newer version of power grids which basically is the digitalization of the infrastructure with the involvement of smart meters, sensors and different types of IED's (Intelligent Electronic  ...  SCADA SYSTEM SCADA stands for Supervisory control and data acquisition. When we are talking about digitalizing power grids, it is achieved through SCADA.  ... 
doi:10.35940/ijitee.i7848.078919 fatcat:awhubcu26jbqbawh2bw7o2pcfe

PROCESS FLOW CONTROL USING SCADA AND PLC

2017 International Journal of Recent Trends in Engineering and Research  
SCADA is used to monitor the boiler temperature, pressure and water level using different sensors and the corresponding output is given to the PLC which controls the boiler temperature, pressure and water  ...  So a reliable monitoring system is necessary to avoid catastrophic failure, which is achieved by Programmable Logic Controller & Supervisory Control and Data Acquisition system.  ...  So, an intelligent control using PLC& SCADA is developed to meet the nonlinearity of the system for accurate control of the boiler steam temperature and pressure level.  ... 
doi:10.23883/ijrter.2017.3401.uxoln fatcat:gv7zidx3onc7xbns7aboq72e3a

Design of Auxiliary Decision-Making System for Power Grid Fault Disposal

Hao Chen, Xinfan Jiang, Dijun Hu, Tao Wang, Fan Zhou, X. Lei, S.P. Kozaitis, C.-C. Ku
2018 MATEC Web of Conferences  
Accident treatment is the most important part in the daily monitoring, and the improvement of the intelligent level is of great significance to improve the efficiency of scheduling accident and shorten  ...  This paper puts forward a set of intelligent power grid accident treatment decision system, introduces the background of the system, the composition module and the realization of functions, to facilitate  ...  MATEC Web of Conferences Therefore, there is an urgent need for an effective intelligent decision-making system for accident handling, control the operation of the power grid in real time by automated  ... 
doi:10.1051/matecconf/201816004002 fatcat:6ev5ml3yqbcyfapmrergqom3we

Advanced and Rapid Tool in Control Room to Determine the Cause and Location of Events in Transmission Network

Igor Ivanković, Ksenija Žubrinić-Kostović, Ana Kekelj, Zoran Bunčeć, Per Andersson, Jan Eric Larsson
2020 Journal of Energy - Energija  
Basic principles for alarm handling in SCADA system is given with all limitations. New tool, Intelligent Alarm Processing system is designed and implemented in control room.  ...  Special attention must be paid for modelling protection data in SCADA system which are sent to this new tool.  ...  INTRODUCTION The Transmission System Operator Company (HOPS) uses one SCADA system for monitoring and control function and for maintenance purposes [1] .  ... 
doi:10.37798/202069449 fatcat:57xtvcl2mzdvnmvccgbne57ybu

A Review and Case Study on Improvements in Substation Automation Systems for Better Performance of Indian Power Distribution System

Naveenkumar R Kulkarni
2018 International Journal for Research in Applied Science and Engineering Technology  
Power utilities adopt SCADA system for maintenance development and operation.  ...  It provides an application program for acquiring real time data from IED/RTU using open process control technology for substation monitoring.  ...  This data is taken as reference and work is in progress to develop Automatic system that can monitor load fluctuations and take intelligent decisions on critical conditions using DCS controller interfaced  ... 
doi:10.22214/ijraset.2018.3454 fatcat:wnyi3xtberczlfhvyp5fzzxxpy

Intelligent Energy Resources Management in the Context of Smart Grids

Zita Vale, Hugo Morais, Pedro Faria, Carlos Ramos
2011 IFAC Proceedings Volumes  
The resources are controlled through a flexible SCADA (Supervisory Control And Data Acquisition) system that can be accessed by the evolved entities (VPPs) under contracted use conditions.  ...  This paper proposes a methodology for energy resource management that considers several Virtual Power Players (VPPs) managing a network with high penetration of distributed generation, demand response,  ...  This paper presents an energy resource management methodology, based on an intelligent and flexible SCADA that supports these concepts.  ... 
doi:10.3182/20110828-6-it-1002.03184 fatcat:bpiq6ijz4zcahdaxm4d4jiitey

SCADA system for islanded DC microgrids

Xiao Zhaoxia, Guo Zhijun, Josep M. Guerrero, Fang Hongwei
2017 IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society  
The SCADA system is based on KingView 6.55, and establishes data communication between the host and the slave computers through intelligent modules and different communication techniques.  ...  This paper develops a supervisory control and data acquisition (SCADA) system to monitor an islanded DC microgrid including wind turbine, photovoltaics, and battery units.  ...  Introduction to System Software Structure The software development for the host computer in the microgrid SCADA system is the KingView 6.55, developed by the company Beijing Asian Control.  ... 
doi:10.1109/iecon.2017.8216449 dblp:conf/iecon/XiaoGGF17 fatcat:bvtuxaqcdrehrblc7swr5bnqwu
« Previous Showing results 1 — 15 out of 4,966 results